Peugeot 208 Key Replacement
It is recommended to leave the replacement of Peugeot keys for 208 to auto locksmiths who have the necessary equipment and technical expertise. They will be able to create and program new keys much faster than a dealership would and at a lower price.
If your key fob has stopped locking or unlocking your doors, it is likely due to a dead coin battery. There are many other reasons that the key could be malfunctioning.
Dead Coin Battery
A dead battery can stop your Peugeot 208 from locking and unlocking, as well as hindering it from starting the engine. If this is the situation, you'll need apply the backup starting technique which is explained in the owner's manual to your vehicle.
Another reason your 208 may not start is that the spark plugs are been worn down. The spark plugs are responsible to ignite the fuel that starts the engine. They only last for a certain amount of time. They'll eventually degrade if they aren't used frequently enough.
Fortunately, there's an easy solution to this problem. Check the voltage of the battery using a multimeter. If it is below 11.5 volts it is time to replace it. It is also necessary to clean the battery's contacts in the event that it is damaged by corrosion. This can be done by removing the rubber covers off the two battery terminals and then using a wirebrush to remove any parts of the battery that are corroded. Then, you must reconnect the positive and negative pole cables.
Water Damage
If your 208 won't turn on and the battery isn't flat, then you need to make sure that the spark plugs are working. It could be that they are simply too dirty and do not spark. https://www.g28carkeys.co.uk/peugeot-car-key-replacements-near-me/ can be fixed easily by cleaning the spark plugs in a workshop.
Peugeot cars have a transponder style key that works with the car's immobiliser system. This makes sure that only the correct key is able to start the engine. If the chip inside the Peugeot key is damaged, then it won't transmit the correct signal to the vehicle.
Water damage is a typical cause of this problem. This is most common in colder climates, as the vehicle may have been exposed to rain or snow. In this instance, you should contact a trusted locksmith who has the necessary tools and equipment to reprogram the key. They will also have all the latest technology and machinery required to create the Peugeot smart key. The process should take no more than 15 minutes.
Contacts with the battery may be damaged.
Peugeot changed from the old carbon-encased transponder chips to an entirely new kind of chip that utilizes electronic components that are placed on circuit boards. The new system is great when it's brand new, but the circuit boards wear out over time and stop working properly.
This can prevent the immobiliser chip from activating which means that your car won't start. Contact an Peugeot specialist, or a locksmith if this is the situation.
A common issue is when the battery of the key fob begins to die. This causes the blade of the key to stop feeding into your lock. A locksmith for cars can replace the battery and cut a fresh blade for you, it's typically a quick fix.
Faulty Receiver Module
If your Peugeot key fob was not working after dropping it on the floor, or being exposed to a sudden rain or accidentally washing it may be due to a malfunctioning receiver module. The receiver module is responsible for transmitting radio frequency to the onboard computer that controls the central locking system of your Peugeot vehicle.
The rubber seals on the key fob keep water from getting to the electronic chip. However prolonged exposure to water can be able to penetrate these seals and cause damage to the chip. Submerging the key fob into the ocean at the beach or throwing it into the pool can be particularly damaging due to the high salt content.
If your Peugeot spare key fob doesn't work, you'll need to have the module replaced. This should be done by an Peugeot specialist or an expert auto locksmith. Peugeot keys unlike other automobiles, are secured by an immobilizer device. This requires the right code to begin the car. This is why it is imperative that you should only rely on an authorized Peugeot locksmith to create and program a replacement.
Computers with faulty on-board computers
The on-board computer in your Peugeot is responsible for many of the systems within your car, ranging from power windows to the airbags. The on-board computer displays a code when something goes wrong. The code is stored within the system and remains there until the issue is solved. This may require the on-board computers to be replaced.
One of the most frequent reasons for the airbag light coming on is loose or corroded connectors in the airbag sensor. This can be caused by wear and tear, aging or exposure to salt and moisture. This problem should be dealt with as soon as you can, because an airbag malfunctioning could pose a risk in the event in the event of an accident.
If your Peugeot is showing a card detected as not present error, the battery inside the key fob could be weak or dead. This can prevent the key fob from sending a signal to disable your vehicle's immobilizer. Try this by pressing the unlock key on the fob's key and then trying to start your vehicle. If this fails then the battery in the key is in need of replacement.