Share

How to choose monitor speakers

Public

30 October 2020

Views: 5

Unlike speakers, monitor speakers are not intended for the audience. These are speakers that performers use to assist them during their show. You can also find monitor speakers that are used in different places, like a recording studio, where the singer can hear her voice as it really is, and there are no digital enhancements or anything like that. It helps not only the singer but also the audio technicians to create the desired effect for the song they are recording. These types of speakers are also known as reference monitors.

You will also find mono, 2-channel or surround sound monitor speakers. Each of these speakers plays an important role in helping you decide the type of monitor speakers to buy.

Mono speakers have only one audio output, and this means it has less depth of sound. The 2-channel monitor speaker has a left and right speaker, which means you get a better sound frequency. With surround sound, you have the luxury of 5-7 speakers, and if you plan to have a home theater or orchestra recordings, this is the perfect option for you.

Aside from the audio output, you should also consider balance, volume control, mix, EQ, and purpose. To get started, you need to establish your purpose in wanting these speakers. Once you've done this, you can go ahead and choose the best monitor speakers that can be customized based on your needs.

Once you've bought (or even before you buy) your speakers, you should have a pretty good idea of ​​where you want to place them. This is very important because sound can bounce back and affect performance. For example, if you plan to make a recording and are using a microphone, if the position of the monitor speakers is too close or in direct line with the microphone, then you will have problems. To solve this, you can walk away from each other and stay away from any wall or flat surface. In this way, the sound cannot bounce back and give you feedback.

Finally, the best way to choose your monitor speakers correctly is to make sure you get technical advice on setup and demo for you, if possible.https://audio-pro-central.com/

Advertisement

Disable Third Party Ads