Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot 308 key fob stopped working after a few days it could be due to a dead battery in the coin, water damage and receiver module issues or a malfunctioning electronic chip. These are all simple fixes and you can restore your car to speed in no time!

Car keys can also fail due to the fact that the blade on the key gets worn. It is easy to fix by visiting your local Car Key Man Auto Locksmith and let them put in an entirely new key blade for you.

Battery

The battery for the key fob in your Peugeot 308 can sometimes die or become insufficient to send an effective signal to the car. The key fob can not function and stop you from locking or unlocking your doors or starting the engine. To fix this issue, you'll have to replace the battery on your key fob.

You'll need the replacement battery from an auto parts store or a local hardware store. Make sure the battery is brand new and has not stored on the shelf too long. A new battery will have greater capacity and be able to send a stronger signal to the car.

After replacing the battery, try unlocking and locking the doors of your Peugeot with the key fob. If the doors aren't unlocking it's likely that the receiver module in the car is the cause. The local Peugeot dealer can reprogramme the receiver module.

The chip inside the key fob could also be damaged. This could happen if drop your key fob on the ground or expose it to water. Rubber seals that shield your chip from moisture might become worn out over time. This is particularly true when you expose your key fob to water for long periods of time, for example, submerging it in the ocean. To prevent this from happening you should keep your key fob clear of moist areas and away from water.

Water Damage

If your key fob becomes submerged in water, whether you dropped it into the pool or fumbled it into a puddle, don't assume it's a lost cause. While the key fob has rubber seals to protect it from water, long-term exposure to water can cause damage to the electronic chip. Water is a great conductor and any water that enters the key fob can cause the short circuits to be in series that eventually destroy the electronic chip. After removing https://www.g28carkeys.co.uk/peugeot-car-key-replacements-near-me/ clean the contacts with isopropyl. Dry them completely before putting them back into.

Your Peugeot 308 may not start because of the battery being dead. Jumper cables are a great option to restart the engine if you have an additional vehicle. If the battery is the problem and it is not working, it should be replaced.

Another possibility is an ineffective receiver in the vehicle, which could prevent it from receiving a signal from the key fob. It could be due to a issue with the antenna, or wiring, or the key fob might be damaged. If you are using a new key fob, it might need to be programmed into the vehicle. If you're not able to solve the issue, you should contact a professional technician. A professional who has been trained in the field will be able to detect the issue quickly and then fix it right away.

Radio Interference

The signs of a key fob not being recognized or having a restricted range typically indicate that there is a problem in the system. This can be either radiated, or conducted, with the latter resultant from power supply cables or speaker wiring passing too close to electrical components. In general, rerouting cables or moving them away from these components will solve the issue.

It's unlikely that someone is watching your key fob's signals to steal your car, but it's possible that the signal has been muffled by radio frequency interference. Fortunately, this is not a problem to fix.

If you're experiencing a problem with your keys that are not recognized, try a fresh battery. Also, ensure that the battery is the right size and type. Incorrectly sized batteries could harm the fob.

These devices could interfere with the key signal if they operate on the same radio frequency. Beware of attaching these devices to your key fob.

Pairing Issues

A car's remote keyless entry system contains a receiver that receives radio frequency signals from the key fob. It is not possible to start your car if this receiver isn't working even if your key fob is functioning and is reprogrammable. The issue could be caused by a number of factors, including the dead battery in the coin and water damage. The receiver may also be malfunctioning due to a software error or internal damage in the key.

The battery for your coin in your Peugeot 308 keyfob may have been drained. It is possible to replace it with a new battery, however, it's important to select the correct battery for your key fob. The wrong battery could result in further problems with the key fob, therefore it is best to choose the original battery or a replacement that is identical in size, voltage and specifications.

Another reason the reason your Peugeot 308 key fob might not be working is due to the fact that it has been paired to a different car. This could be the case if you have given your key fob to someone else or when the key has been used to unlock and start other vehicles. This issue can be solved by reprogramming the key fob using an OBDII scan. This tool typically asks you for certain information regarding your vehicle, such as the VIN or engine type, so it's important to enter it correctly.