Bio-Fires - An Eco-Friendly Alternative to Real Fires

Biofires are a warm and comfortable form of warmth with no harmful gasses or soot. They are easy to install similar to an electric fire.

The contract funded by BARDA supports the development of the BioFire Emerging CoV Panel, a nucleic acid amplifying test that can be used with BioFire FilmArray Systems to detect human coronaviruses, both emerging and known, in nasopharyngeal or oropharyngeal sw and saliva samples.

Eco-friendly

Bioethanol is a green alternative for gas or wood. The fuel is created using plant by-products, and an organic process converts sugars into alcohol. It offers many advantages over other fireplace types, including no harmful emissions and a less carbon footprint. Bioethanol is a better alternative to other fires as it doesn't produce smoke or soot. It does not require a flue and can be used in the garden or home.

Multi-drug resistant bacteria (MDR) are among the most dangerous health threats of today. New testing methods can identify MDR bacteria early and avoid further complications. BioFire FilmArray is one such test. This test employs the symptom driven approach to identify pathogens that may cause sepsis. The results are available in one hour, so that healthcare professionals can begin treatment immediately.

The Molecular PCR process increases DNA and RNA molecules to millions or billions of copies. This makes it possible to examine small amounts of body fluid or tissue to determine the presence of specific genetic sequences. It is a useful tool for laboratory professionals and will help them detect serious diseases efficiently and cost-effective way. The BioFire film array PCR system is a revolutionary tool for infectious diseases diagnosis. https://www.fireplacesandstove.com/categories/bioethanol-fireplaces can be utilized in a variety of locations including laboratories and hospitals.

For respiratory tests, a simple swab can be applied to your nose and sent to the lab to be analyzed. BioFire's technology provides a rapid turnaround time, allowing clinicians to act quickly. This means that there is less waiting for results and better patient outcomes.

The Chanouf Farm Biofire company has developed an agroforestry recycling system that uses pear and olive waste to produce biomass power and organic charcoal. The products are sold to the public to replace traditional coal briquettes and wood charcoal with eco-friendly alternatives. Additionally, these bio-waste products can be used to fuel the Kachelofen fireplace that provides radiant heat that is a green alternative to electric and gas-fired fireplaces.

Clean burning

When you use a bio-fire, you don't just conserve energy, but also aid the environment. Bioethanol's combustion does not release harmful gases, such as carbon dioxide. It releases only water vapour and heat. This makes it a safer and cleaner alternative for indoor use.

Ethanol is produced by fermenting sugars in plants. It is a renewable source of fuel. It can be produced quickly, and it will not be as depleted as fossil fuels, such as oil and coal. Bioethanol can reduce dependence on foreign imports and the possibility of shortages.

Bio-fires are easy to set up and can be utilized in existing fireplace openings, or as freestanding units. This makes them a great alternative to wood and gas fires. They are a great option for offices and homes that don't have chimneys.

When a bio fire is ignited, a special media is built into the burner that absorbs the liquid ethanol fuel, making it ready to be used for combustion. The ethanol is burned by the flames and the vapours are emitted into the air via the vent. This gives the flames a more natural appearance and a stunning beauty that can't be matched by wood or gas fires.

Bio-fires have the advantage of not needing a vent or flue to replenish oxygen used in the process of combustion. They also don't release carbon monoxide which must be vented out into the room in gas fires with open fronts.

The BioFire Respiratory panel employs multiplex PCR to simultaneously test for respiratory pathogens. It takes around an hour. This allows doctors to detect and eliminate respiratory diseases quicker than they could through standard lab tests that require patient visits. Both patients and the health system benefit from this.

Safe indoors

Bio-fires are able to be used indoors more safely than traditional fires because they don't produce smoke or ash, as well as carcinogenic fumes. They also don't release carbon monoxide that can be fatal if inhaled. However bio-ethanol fuel is flammable and you must be careful when handling your burner and refilling it. It should be replenished only after the burner has been switched off and the fire is cool, and any spills need to be cleaned immediately.

The company's diagnostic FilmArray system, BioFire Torch and BioFire 2.0--are simple to use and can run eight different diagnostic panels that have been cleared by the US Food and Drug Administration, three additional panels authorized for use in emergency situations and six environmental test panels. These tests include a respiratory test panel designed to quickly recognize and distinguish respiratory diseases such as COVID-19, emerging coronaviruses, and COVID-19.

The COVID-19 panel was awarded a grant by the Biomedical Advanced Research and Development Initiative (BARDI), which is part of the US Department of Defense's Strategic Access Program. The COVID-19 test is an antigen-based method, allowing clinicians to distinguish between the symptoms caused by COVID-19 and other respiratory infections with the same precision as the current rapid antigen tests in use.

In addition the company is working on a SARS-CoV-2 assay for its Respiratory 2.1 Panel. This multiplexed nucleic acids amplification assay will be available on the BioFire FilmArray 2.0 and Torch Systems, and will detect SARS-CoV-2 as well as 21 other respiratory pathogens within nasopharyngeal or saliva samples within less than an hour. The test will be developed in a short time frame and FDA approval for EUA and 510(k) will be scheduled to be granted by Q3 2020.

Although bio-ethanol flame-effect fires are extremely safe to use, they should be kept away from combustible materials such as curtains, blankets and pillows. You should never place them near anything that can catch fire. Keep flammable materials away from the flame-effect fires by at minimum 10 feet. The bioethanol fuel should be kept in a dry, secure location that isn't easily accessed by children or pets.

Simple to use

A bioethanol fireplace is simple to use and has no flue to worry about. All you need is a safe location to place it in and some fuel. Once you've filled the burner, light it. This will give the appearance of an actual flame. When the flame is lit, it will heat the room without much smoke. It also produces plenty of heat, similar to what wood-burning fires would. Bio fires are also easy to maintain and don't need any servicing or maintenance, other than the occasional cleaning.

In contrast to other tests that are quick however, the BioFire RP2.1-EZ test employs a syndromic approach to identify the most common signs of infection and returns results in just 45 minutes. The test is designed for patients suffering from respiratory symptoms that are upper respiratory and has a 98% specificity rate. The test can detect up to 19 bacteria and three viruses in one sample, making it a great option for managing patients.

The BioFire system integrates multiplex PCR testing, sample preparation and report on results into an integrated platform. This lets laboratories to streamline their workflow and eliminates the necessity for a sequential approach that requires a separate and send-out tests. This can result in better patient outcomes, as the right test is used the first time and the need for expensive tests based on culture is eliminated. The BioFire system is able to identify pathogens at a cellular level and their antimicrobial resistance gene. This information is more sensitive than the conventional methods.

Molecular diagnostics is increasingly being used to improve the outcomes of patients and treatment. The BioFire RP2.1 plus panel employs the syndromic approach to simultaneously target 23 of the most frequently involved pathogens in respiratory infections. The assay is available on the BioFire film array 2.0 and Torch systems, and can provide results in 45 minutes.

The test is available in the US under FDA Emergency Use Authorization. It will be available commercially after initial DoD requirements are fulfilled. The BioFire Defense team has also developed a fully automated, test-to-result assay that allows for the rapid detection of COVID-19. This assay is in development and will be made available once the initial DoD demands are satisfied.