How to Replace a Nissan Juke Spare Key
Nissan Juke is a fun and stylish hatchback that has an unusual engine configuration. It's quite noisy but still fun to drive.
Replace the battery for the key fob of your Nissan Juke every two years, or when it's at a low. It's easy to do at home, but you'll require a few tools.
Dead Coin Battery
If your Nissan Juke key fob has stopped working the first thing you should examine is the battery that is inside it. https://www.g28carkeys.co.uk/nissan-car-key-replacements-near-me/ could be dead and need to be replaced, which is a simple fix that takes only some minutes. Flip the fob upside down and you'll be able access the tiny latch/release on the back. Replace the battery you have previously installed with the new one, making sure it's on the bottom of the fob. Make sure to align the two halves of the fob carefully.
The fob should be cleaned if it was exposed to water prior to being able to insert the new battery. Clean the fob with isopropyl electronic cleaner and a towel. Then allow it to dry completely prior to installing the battery.
To start the car, the key fob must also be connected to the car. This can be accomplished using the instructions in the owner's manual or by using an OBDII scan. If the key fob hasn't been connected, this is the most likely cause of the reason it stopped functioning. A malfunctioning chip inside the fob can also cause it to stop working however, this is a rare. A new receiver module could be required in this scenario. If this is the case, it will need to be replaced by an authorized technician.
Water Damage
Key fobs are battery-powered, and the batteries must be replaced every two years or more, or at the first sign of the car not responding when you press the "start" button. Keys have rubber seals to keep water out, but submerging the key fob in a pool or ocean water can damage the chip that is inside. If this happens then you'll need an alternative key from Nissan or a locksmith.
It's possible that the computer lost connection to the key fob This could be due to a variety of reasons. This can be fixed by restarting the car. If the "Key ID error" message still appears, you will need to contact Nissan for assistance.
The three most frequent causes of this problem are dead battery on the key fob, a non-programmed key, and a damaged or defective key fob. The first two issues are fairly easy to fix, while the third is more difficult to diagnose and repair but can be solved with patience. WhoCanFixMyCar allows you to compare Nissan Key Replacement prices in your region and schedule your repair. It only takes a few minutes, and you can even read reviews from local garages, Nissan car mechanics and dealerships before you decide.
Faulty Chip
The key fob of your Nissan Juke contains a special chip that transmits a signal to the vehicle when you turn it. If that chip is faulty it could cause the key to stop working. In this instance you'll have to repair the issue by replacing the key. There are a myriad of reasons your Nissan Juke's key may be defective, including water damage or a dead coin battery or a damaged receiver module.
Check the chip for water damage in the event that your key fob stopped working after a bath or wash. Make sure the metal retaining clips are tight and the chip is not exposed to water. If you notice any signs of water damage to the electronic component, take off the battery and clean it with isopropyl-ethanol or electronic cleaner.
If the chip is damaged, you'll need to contact your local locksmith or dealer. To find a replacement chip, they will require the year, model and year of your car. You will also have note down your VIN (Vehicle ID Number) so that the dealer or locksmith knows what key you have. This will enable them to check the correct key code and ensure that they cut the correct one.
Faulty Receiver Module
The key fob sends the radio frequency signal to your car in order to perform various functions. It can unlock the trunk as you hurry to the car with your groceries or start your car by pressing the button on the fob. It can also open your windows and turn on the horn in case you accidentally lock your keys in the car.
If the key fob ceases working, it could be an issue with the receiver module within the vehicle. The receiver modules are tuned to detect specific frequencies that match the signals generated by the Nissan key fob. A faulty receiver module will prevent your car from responding to the signal received by the key fob of Nissan.
Regardless of how your Nissan key fob is damaged, it's beneficial to have a spare in case the key gets lost or broken. A locksmith or dealership can program the spare key to work with your Nissan. This can help you avoid the hassles of losing your keys or locking them in your car.
If your Nissan Juke's key fob has been exposed to rain or clean tap water, you could fix the problem by cleaning it with isopropyl, or an electronic cleaner. If the chip has become damaged, you'll need to purchase an alternative keyfob that could be programmed to your car by a dealer or locksmith.