Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot 308 key fob has stopped working after a few days, it could be due to a dead battery in the coin, water damage and receiver module issues or a faulty electronic chip. https://www.g28carkeys.co.uk/peugeot-car-key-replacements-near-me/ are all simple solutions that will get your car back to speed in a matter of minutes!

The key blade could become worn out and cause an unusable car key. It is easy to fix when you visit your local Car Key Man Auto Locksmith and let them put in a new key blade for you.

Battery

The key fob battery in your Peugeot 308 can sometimes die or become weak enough to send a strong signal to the car. This can cause the key fob's function to cease, preventing you from opening and locking the doors or even starting your engine. You'll need a new battery on your key fob to correct this.

You can buy a brand new battery at an auto parts store, or at your local hardware store. Make sure the battery is brand new and not sat on the shelf too long. A brand new battery will have greater capacity and can send a stronger signal to the car.

After replacing the battery, try unlocking the doors and locking them with the key fob. If the doors aren't unlocking, it's likely that the receiver module inside the car is the cause. The local Peugeot dealer can reprogram the receiver module.

The internal chip of the key fob could also be damaged. It's possible to cause damage to your key fob if you drop it on the ground or expose it to moisture. Rubber seals that protect your chip from moisture might get worn out over time. This is particularly true when you expose your key fob to water for extended periods of time, like submerging it at the beach in the ocean. To avoid this from happening, it's important to keep your key fob free from moisture and not let it come into contact with water.

Water Damage

Don't lose hope on your key fob when it gets wet, whether you dropped it in the pool or stumbled into a puddle. Although the key fob is equipped with rubber seals to protect it from water, long-term exposure to water can cause damage to its electronic chip. Because water is an excellent conductor, any water that makes it inside the key fob could cause a series of short circuits, which could eventually destroy the chip. After removing the battery, scrub the contacts with isopropyl alcohol and dry it completely before putting it back into.

A dead battery might be the reason your Peugeot 308 won't start. If you have an extra vehicle, jumper cables may be used to get the engine working again. If the battery is defective, it must be replaced.

Another reason could be an ineffective receiver in the vehicle that could prevent it from receiving a signal from the key fob. It could be a issue with the antenna or wiring or the key fob may be damaged. If you are using an entirely new key fob, it may need to be programmed for the vehicle. If you are unable solve the issue yourself then contact an expert technician. A professional who has been trained in the field will be able diagnose the problem quickly, and fix it immediately.

Radio Interference

Signs like key fobs not being recognized or having a narrow range typically indicate that there is a problem with the system. The interference could be radiated or transmitted, the latter caused by speaker and power cables passing too close to electrical components. In general, rerouting cables or moving them away from these components will resolve the issue.

It's unlikely that someone is monitoring your key fob's signals to take your car away, but it's possible that your signal has been masked by radio frequency interference. This is a simple issue to fix.

If you're experiencing a problem with your key fobs that aren't recognized, try using a new battery. Also, ensure that the battery is of the right type and size. A wrongly sized battery can cause damage to the fob.

Certain alarm systems and radar detectors operate on the same radio frequency as your key fob, and they can cause them to interfere with your key signals. It is best to avoid using these devices with your key fob.

Pairing Issues

A car's remote keyless entry system has a receiver that receives radio frequency signals from the key fob. You will not be able start your vehicle if the receiver is not functioning properly even if your key fob is in good working order and can be reprogrammed. This problem can be caused by a variety different ways, such as an inoperative battery on the coin-cell or water damage. The receiver may also be malfunctioning due to an internal or software glitch or damage to the key itself.

One of the main reasons that your Peugeot 308 key fob doesn't work is because the coin battery inside has gone out of service. The battery can be replaced, but make sure that it is the right battery for your keyfob. It is recommended to use a battery that is the same size in terms of voltage, size, and specifications as the original.

Another reason why the reason your Peugeot 308 key fob might not be working is due to the fact that it is connected to a different car. You may have accidentally given your key fob a friend or it was used to unlock other vehicles. This can be solved by reprogramming your key fob with an OBDII scan. This tool will request information about your car, for example, its VIN or engine type. It is essential that you enter the correct details.