Peugeot 208 Key Replacement

It is best to delegate the replacement of Peugeot 208 keys to auto locksmiths that have the necessary equipment and technical expertise. They can make and program new keys faster than a dealership would and at a lower price.

A dead coin battery is most likely to be at fault if your key fob stops locking or unlocking the doors. However, there are many other reasons why the key might be malfunctioning.

Dead Coin Battery

A dead coin battery will hinder your Peugeot 208 from locking or unlocking, and won't start the engine. In this scenario you'll need make use of the alternative method for starting found in your vehicle's owner's manual.

Another reason why the 208 won't start is that the spark plugs have been worn down. Spark plugs are what ignite the fuel to start the engine. However they have a finite lifespan. If they're not used enough they will eventually fail.

There is a simple solution for this issue. Check the voltage of your battery with a multimeter. If the voltage is lower than 11,5 volts, then it's time to replace it. It is also important to clean the contacts of the battery in case it is corroded. https://www.g28carkeys.co.uk/peugeot-car-key-replacements-near-me/ can be done by taking off the rubber covers from the two battery terminals, and then using a wirebrush, you can remove any damaged parts of the battery. You should then reconnect the cables that connect the positive and negative poles.

Water Damage

If your 208 will not start and the battery has not failed, you should look at the spark plugs. It is possible that they're overly filthy, making them unable to spark. This is easily fixed by cleaning the spark plugs in a workshop.

Peugeot automobiles use a transponder key that works with the car's immobiliser system. This makes sure that only the correct key can start the engine. If the chip in the Peugeot key is damaged, it will not send the correct signal to the vehicle.

This is a typical issue that is often caused by water damage. This is most common in colder climates, as the vehicle might have been exposed to rain or snow. In this case, contact a reputable locksmith who has the required tools and equipment to reprogram the key. They will also have all the latest technology and equipment needed to create a Peugeot smart key. The process shouldn't take more than 15 minutes.

Contacts to the battery are not working properly.

Peugeot changed from the carbon-encased transponder chips to an entirely new type of chip that relies on electronic components on circuit boards. The new system is great in its initial state, but the circuit boards wear out over time and cease to function properly.

This could stop the immobiliser from activating so your vehicle won't be able to start. Contact an Peugeot specialist or a locksmith, if this is the case.

A common issue is when the battery of the key fob starts to die. This causes the blade of the key to stop feeding into the lock. A locksmith for cars can replace the battery and cut a new blade for you, it's generally a quick fix.

Faulty Receiver Module

If your Peugeot key fob stopped working after dropping it on the floor, getting exposed to a sudden downpour or accidentally washing it the wrong way, it could be due to a faulty receiver module. The receiver module is responsible for transmitting radio signals to the onboard computer which manages the central locking system of your Peugeot vehicle.

The rubber seals on the key fob prevent water from getting to the electronic chip. The chip can be damaged by water when it is exposed to water for a prolonged period of period of. Submerging the key fob in ocean water at the beach or throwing it into the pool can be especially damaging because of the high salt content.

The module needs to be replaced if your Peugeot spare key no longer works. This can only be done by an Peugeot specialist or expert auto locksmith. Peugeot keys unlike other automobiles, are protected by an immobilizer system. This requires the right code to begin the car. This is the reason why you should only go with a knowledgeable Peugeot locksmith to handle the task of creating and programming an alternative.

Computers with faulty on-board computers

The on-board computer inside your Peugeot is responsible for a number of the systems within the car, from power windows to airbags. When something goes wrong with these systems, it'll typically display a code that identifies the issue. The code is stored within the system and remains there until the problem has been resolved. In most cases, this will require replacing the on-board computer.

The most frequent cause for the warning light for airbags to flash is corrosion or loose connections in the sensor. This could be due to wear and tear, age or exposure to salt and moisture. This issue needs to be addressed as soon as you can, as an airbag that's malfunctioning could pose danger in the event in the event of an accident.

If your Peugeot is showing a card not detected error, then the battery inside the key fob might be dead or weak. This prevents the key fob from sending a signal that disarms the standard immobilizer in your vehicle. Try this by pressing the unlock key on the key fob and then trying to start your vehicle. If this doesn't work the battery on the key has to be replaced.