Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot key fob suddenly stopped working it could be due to a dead battery in the coin-cell unit, water damage, receiver modules issues, or even a defective chip. These are all easy fixes that can bring your car back to speed in no time!

Car keys can also become faulty because the key blade gets worn. You can easily fix this problem by visiting your local Car Key Man Auto Locksmith to get a new blade installed.

Battery

The key fob in your Peugeot 308 may die or become weak enough to not send a powerful signal. The key fob could stop working and prevent you from locking or unlocking your doors or even starting the engine. You'll need a new battery on the key fob in order to fix this.

You can buy a brand new battery at an auto parts shop, or at your local hardware store. Make sure that the battery is brand new and not on the shelf for too long. A new battery has greater capacity and can transmit a stronger signal your car.

After replacing the battery After replacing the battery, try locking and unlocking the doors of your Peugeot using the key fob. If the doors aren't unlocking, it's likely that the receiver module inside the car is responsible. Your local Peugeot dealer can reprogramme the receiver module.

The chip inside the key fob can also be damaged. It's possible to cause damage to your key fob if you drop it on the ground or expose it to water. Rubber seals that shield your chip from moisture might wear out over time. This is particularly true when you expose your key fob to water for prolonged periods of time, such as submerging it at the beach in the ocean. To prevent this from happening it is recommended to keep your key fob out of moisture and away from water.

Water Damage

If your key fob becomes wet in water, regardless of whether you dropped it in the pool or fumbled it into the puddle, don't believe that it's an accident. The key fob is protected by rubber seals however, prolonged exposure to water could harm its electronic chip. Since water is such an excellent conductor and conductor, any water that gets inside the key fob may cause a series of short circuits that will eventually damage the chip. After removing the battery scrub its contacts with isopropyl alcohol, and dry it completely before putting it back in.

A dead battery could be the reason that your Peugeot 308 won't start. If you have an extra car, jumper cables can be used to start the engine again. If the battery is the problem and it is not working, it should be replaced.

Another reason could be a defective receiver inside the vehicle, which could block the signal from the key fob. The key fob may be damaged or there may be a problem with the antenna, wiring or the key fob itself. If you have a new key fob it could need to be programmed into the vehicle. If you are unable solve the issue, contact an expert technician. A trained technician in the field will be able to determine the issue quickly and fix it immediately.

Radio Interference

Signs like key fobs not being recognized or with a limited range of operation usually mean there is a problem with the system. The interference could be transmitted or radiated, the latter resulting from power and speaker cables getting too close to electrical parts. Generally, re-routing the cables or moving them away from the components can solve the issue.

It's unlikely that someone is monitoring the key fob's signals to steal your car, however it's possible that your signal has been drowned out by radio frequency interference. This is an easy issue to resolve.

If you're having issues with your key fobs that aren't being recognized, try using a fresh battery. Make sure the battery is the right size and type. Batteries of the wrong dimensions can harm your battery.

These devices may interfere with the key signal, if they utilize the same radio frequency. Avoid attaching these devices to your key fob.

Pairing Issues

The remote keyless entry system in cars has an antenna that receives radio signals from the key fob. If this receiver has developed a problem, you won't be in a position to begin your vehicle, even if the key fob is working and can be reprogrammed. https://www.g28carkeys.co.uk/peugeot-car-key-replacements-near-me/ could be caused by a range of reasons, such as an inoperative coin battery or water damage. The receiver may also be malfunctioning due to a software error or internal damage in the key.

The battery inside your Peugeot 308 keyfob has probably died. The battery can be easily replaced, but you must be sure it's the right battery for your key fob. Using an incorrect battery could result in further problems with the key fob, so it is recommended to use either the original battery or a replacement that is identical in size, voltage, and specification.

Your Peugeot 308 keyfob may not function if it was connected to another vehicle. This could be the case if you have given your key fob to a person you know or when the key has been used to unlock or start other vehicles. This can be resolved by reprogramming the key fob using an OBDII scan. This tool typically asks you for certain information about your vehicle, such as the VIN or engine type, so it's important to enter this information correctly.