Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob stopped functioning one day it could be due to a dead coin battery or water damage or receiver module issues, or a damaged electronic chip. These are all easy fixes and you can bring your car back to speed in no time!
Car keys can also fail due to the fact that the blade on the key gets worn. It is easy to fix by visiting your local Car Key Man Auto Locksmith and let them install an entirely new key blade for you.
Battery
The battery that powers the key fob on your Peugeot 308 can sometimes die or become insufficient to send an energizing signal to the car. The key fob can cease to function and stop you from locking or unlocking your doors or starting the engine. You'll need a new battery on your key fob to fix this.
You can purchase a new battery at an auto parts store, or at your local hardware store. When you buy the battery, make sure that it's brand fresh and hasn't just been sitting on the shelf for a long time. A new battery will have more capacity and can send a stronger signal to the car.
After replacing the battery After replacing the battery, try locking and unlocking the doors of your Peugeot with the key fob. If the doors don't unlock the issue is likely to be in the receiver module of the car that can be reset by your local Peugeot dealer.
The chip inside the key fob may also be damaged. This could happen if you drop your key fob on the ground or expose it to water. Rubber seals that protect your chip from moisture might get worn out over time. This is especially the case when you expose your key fob to water over long periods of time, such as swimming it in the ocean. To stop this from happening, it's essential to protect your key fob from water and never let it come into contact with water.
Water Damage
Don't let go of your key fob when it becomes wet, whether you dropped it into a pool or fumbled into a pool. While the key fob comes with rubber seals to protect it from water, prolonged exposure to water may lead to damage to its electronic chip. Water is a good conductor, and any water that gets inside the key fob could cause an array of short circuits, which will eventually ruin the electronic chip. After taking the battery out, clean the contacts with isopropyl ethanol and dry it off completely before putting it back into.
A dead battery could be the reason your Peugeot 308 won't start. If you have an extra car, jumper cables can be used to get the engine going again. If the battery is defective and needs to be replaced, it should be replaced.
Another reason could be a malfunctioning receiver in the vehicle, which could stop it from receiving a signal from the key fob. The key fob might be damaged or there may be an issue with the antenna, wiring, or the key fob itself. If you're using the latest key fob, it may need to be programmed for the vehicle. If you're not able to solve the issue, call an expert technician. A trained technician will be able diagnose the problem quickly and correct it swiftly.
Radio Interference
Interference can cause symptoms such as a fob that isn't recognized or has a restricted range. The interference could be transmitted or radiated, which is caused by power and speaker cables getting too close to electrical components. In general, rerouting cables and moving them away from these components will solve the issue.
It's unlikely someone is listening to the key fob's signal in order to steal your vehicle It's possible, however, that radio interference has slowed the signal. This is a straightforward issue to resolve.
If you're having issues with your key fobs that aren't recognized, try using a fresh battery. Also, make sure that the battery is the right size and type. Batteries of the wrong size could damage your battery.
Some aftermarket alarm systems and radar detectors use the same radio frequency as your key fob and they could cause them to interfere with your key signals. Do not connect these devices to your key fob.
Pairing Issues
A car's remote keyless entry system includes a receiver that receives radio frequency signals from the key fob. It will not be possible to start your vehicle if this receiver is malfunctioning even if your key fob works and can be reprogrammed. This issue could be caused in a number different ways, such as a dead battery in the coin-cell, or water damage. The receiver could also be failing due to a software issue or internal damage in the key.
The battery that powers your Peugeot 308 keyfob has likely died. You can replace it by using a fresh battery, but it is important to get the right battery for your key fob. If https://www.g28carkeys.co.uk/peugeot-car-key-replacements-near-me/ use a battery that is not correct, it could cause further issues with the key fob, so it is recommended to use either the original or an alternative that is similar in size, voltage, and specification.
Your Peugeot 308 keyfob may not function if paired with another vehicle. You might have accidentally given your key fob away to someone else, or the key was used to unlock other vehicles. It is possible to fix this issue by reprogramming your key fob using an OBDII scanner. This tool will ask for information about your vehicle, like its VIN or engine type. It is crucial to enter the correct details.