If your cold faucet only trickles, there are a couple of ways to solve the problem. One problem is due to mineral deposits that have clogged the supply lines. This can make the water flow to the faucet extremely slow. Flush the water lines by opening and closing the water supply valves counterclockwise. Then, return the valves to the underside of the faucet. You should be able to see a noticeable difference in the pressure of the water in the faucet.

Remove the aerator

If the cold faucet only trickles after flushing, the water valve may be clogged. If the valve is clogged with dirt, clean it by removing the aerator. If the filter in the cartridge is dirty, you should replace it. Alternatively, you can clean it with vinegar to get rid of gunk. If you are unable to remove the dirt, simply reattach the aerator piece.

Unplug the water supply tube

The aerator piece may be plugged with sand particles or mineral deposits. If this is the case, unplug the water supply tube. Then, clean it by inserting a sharp object or screwdriver head. Reattach the Kitchen Faucet and test it again. If it still trickles, you may need to replace the aerator. You can also try to fix the cold faucet by replacing the aerator.

Inspect the supply tube

Inspect the supply tube. Typically, it connects to the faucet through a plastic aerator piece. You should remove the aerator by twisting it off. To test the water pressure, run cold water backwards through the faucet without the aerator and see if it works. If the problem persists, you may need to replace the entire faucet. If you are unable to remove the aerator, you should contact a plumber.

If the cold faucet only tricksles, you need to remove the aerator piece. It is located within the aerator piece. You can twist it off by using a screwdriver or an Allen key. Once the aerator is out, you can remove the faucet handle and the cartridge. Next, remove the aerator and try the faucet again. If the problem persists, you might need to clean the cartridge. https://www.nivito.com.au/

The aerator piece can also be the culprit. To clean it, twist the aerator out of the faucet and leave it overnight. It is also possible that the problem is in the water supply itself. If the aerator is not the cause of the low water pressure, you might want to change the cartridge. To do this, you need to replace the supply tube and the aerator. Then, clean the filter by inserting a screwdriver head into the hole.

Check the water supply lines

Another common cause of cold faucet only trickles is a faulty cartridge. The cartridge is responsible for regulating the ratio of hot to cold water and must be in good condition. The balancing valve must be functioning properly for the water to flow through it. If it is not working properly, replace the cartridge. Changing the filter can solve the problem and improve the pressure of the faucet. The next step is to check the water supply lines.