What You Should Know About Your Peugeot Key Fob
Peugeot Key Fob is a handy feature that allows drivers to start their car from an extended distance. This is beneficial during cold or hot weather conditions because it allows drivers to warm up the engine and the interior before getting inside the vehicle.
Car dealerships can cut and program new Peugeot keys for you but only if they are willing to wait weeks for them to do this. We can cut programs, cut, and deliver new Peugeot keys faster with KeyNOW.
Keyless Entry
Along with opening and locking your car doors, some key fobs can also be used to start the engine. This is useful when you have to leave your vehicle during hot weather, or if you're carrying heavy items in the trunk that make it difficult for you to open the door manually. To start the car using your key fob, simply press the unlock button on it several times in rapid intervals. The door locks should close and the red LED light will start to flash. If it doesn't then the battery in your key fob might be dead and in need of replacement. In addition, RF interference from nearby buildings may disrupt your system.
Another interesting feature is that some key fobs contain a physical key that can be used to unlock the car (often only for the door of the driver, but sometimes also for the boot). They can be opened by lifting the flap or pressing the button. The key's physical part can slide out of the slot of the case to gain access to the lock.
Key fobs can get damaged by water - particularly when the chips within them are exposed to salty or soapy water. In some instances key fobs may stop working completely due an issue with the chip. If this occurs, the key fob will need to be replaced - typically by the dealer. Locksmiths can provide replacement keys faster and at a lower cost than dealerships.
Remote Start
You can start your car and not need to carry your keys in your car. This is particularly useful if it's hot outside and you want to cool your car while you run errands. However, there are a few things to consider before making use of this feature.
Certain key fobs come with a specific remote engine start button (for instance Ford's keyfob has an arrow-shaped circular shape that runs clockwise) which you must press to start the car remotely. Other key fobs, like Mazda's requires that you first lock the key and then press the start button.
It could be that you have a dead or weak battery in your key fob, if you are unable to start the car. This is because the batteries of the key fob aren't able anymore to send an intense signal to the car's system.
If this happens, you'll need to either replace the batteries or reprogram your key fob. The procedure varies for each vehicle, but the instructions are typically found in the owner's manual. Our mobile technicians are capable of helping you with this procedure. We have the specialist equipment required to cut and program replacement Peugeot keys at your office, home or when you're stuck by the roadside.
Door Locks
The Peugeot 3008 remote system lets you to lock or unlock your car by pressing the button on your key fob. In contrast to the traditional key which has a key hole that is physical this key fob is able to store an electronic copy of the car keys inside.
It does this by using a radio signal that is only transmitted when the key is within an appropriate distance from the car. A solenoid inside the door lock converts the electronic command to mechanical after the signal is detected. This is when a rod turns to operate the car door locks just as the physical key could.
There are a myriad of reasons for an Peugeot keyfob that's not locking or unlocking your car. The most common is a dead coin battery, which can be replaced in a matter of minutes. Other causes include worn buttons, water damage, signal interference or a malfunctioning electronic chip.
Modern cars require a very precise level of precision in order to function, and the key fob isn't immune to this. The key fob could have been programmed incorrectly or it may be faulty in hardware that stops the vehicle from responding to the signal generated by the key. A licensed locksmith can reprogram the key fob to ensure that it works with your vehicle.
Immobiliser
Peugeot was among the first manufacturers to install an immobiliser in a key. This stops the vehicle from starting if it sees an untrue signal being sent from the key to the car. When it's brand new, this is fantastic however, as they age the chips can get worn out and begin to cause problems. It usually happens when you notice an alert on your dashboard saying 'anti-theft system active or a warning light which reads 'immobiliser failed'.
https://www.g28carkeys.co.uk/peugeot-car-key-replacements-near-me/ are usually called to design and program replacement keys. A mobile locksmith will have standard equipment from dealers on their van. This means they can make new Peugeot keys at your home or on the roadside faster than dealerships.
Generally Peugeot keys begin to exhibit issues as the key blade wears out. The wear causes the mouth of the key to stop feeding into the lock correctly leading to wear on the locks themselves. The issue can be solved by simply changing the blade. It can also be beneficial to have the teeth of the key replaced to enable them to operate more efficiently. This is something only a fully competent auto locksmith is able to do however it will save you lots of headache and expense in the long run.