Replace Nissan Key Fob Batteries

If your Nissan keyfob does not respond to your commands, the battery could be dead. It's an easy fix that most people can complete themselves.

You can get the replacement from a local hardware store or the owner's guide for the specific model you have You'll need follow these steps to change the battery.

Change the Battery

The key fob that you have in your Nissan model is equipped with a built-in battery that eventually loses its charge. Luckily, changing the key fob battery is an easy process which takes just less than a few minutes. First, you'll need to purchase a replacement CR2032 3V battery. It is a small coin-cell battery that is found in most key fobs. https://www.g28carkeys.co.uk/nissan-car-key-replacements-near-me/ can purchase it in a majority of convenience stores. To open the key fob, you'll also need an appropriate pair (latex or not) of gloves and a small screwdriver with a flat head. Check the owner's manual for specific instructions and steps to follow before you begin.

Flip the fob upside-down and look over the backside. You will see a small latch that you need to release by pulling down. This will take the mechanical key from its original position inside the fob.

Insert the new battery next and make sure it is properly positioned. Once the battery is in place then close the fob and then press the two sides together. Check the fob's functionality after completing this step, by pressing the unlock button. It's now possible to use the many functions of your Nissan to determine if everything is working properly. After changing the battery it's recommended to re-program your key fob to make sure that it's working correctly.

Replacing the Transmitter

With your key fob serving as the "key" to many of your car's essential functions, it can be a major blow when you lose or damage it. A damaged or dead key fob can prevent you from locking or starting your vehicle.

It's a good idea to keep a spare key fob on to hand in the event of an emergency. Fortunately, the process of replacing your Nissan key fob is fairly straightforward. You'll require a new battery and a small screwdriver to get rid of the old one however, the replacement process is very easy and should only take only a few minutes.

You'll require a round Panasonic CR 2032 3V battery (you can typically find them in multipacks for under $5 USD). The battery will be located in the back half, and you'll need to gently push the two halves to expose the battery. Make use of a small flathead screwdriver to push the clip at the top of the battery to lift it out, making a note of its position. Replace the battery and put the key fob back together, and test it to make sure it functions properly.

Nissan Intelligent Keys will eventually wear out and require to be replaced, just like any other electronic device. To prevent this you should try to protect your key fob from water, magnetic fields, and physical impacts, so be sure not to drop it or put too much pressure on it.

Replace the Key

If your Nissan key fob fails, you cannot use it to unlock your vehicle or start it. This is a problem for those who must get to work in Detroit or run errands in Dearborn or spend an evening on the town close to Troy.

It's not too difficult to replace the battery in your Nissan Smart Key. You can replace the battery at home or at the dealership. A pack usually costs $5 or less.

Begin by flipping the fob upside down and pushing a small latch on the back. This will release the emergency mechanical key inside. While you won't be able to use the emergency key to start your car however, it will allow you to open the door.

Find a small cut on the top of the casing. These are ideal to place a screwdriver into, allowing you to pry the two parts of the key fob apart. Once you've accessed the internal battery, you can remove it and take note of its location. When you're ready to reassemble your key fob, slide the new battery back into its place and snap the two parts of the case together. Insert the mechanical key and your Nissan smartkey will function as usual.

Other Issues

Many modern cars come with key fobs, which allow you to lock them and open with no physical key. To do this the key fob utilizes small transmitters to communicate with the car's computer system.

There are a variety of reasons that your Nissan key fob does not function after replacing the battery. One reason is that the new battery might not be properly placed in the key fob. Another possibility is that the key fob has to be reset. This is an easy process that can be completed at home with just a few simple tools.

For instance a screwdriver that has flat-headed tips to remove the battery that was in the key fob. With a screwdriver, pry the back of the keyfob open and insert the new batteries. You'll also have to reprogramme your key fob to make it compatible with your vehicle.

You can easily program your Nissan key fob on your own, as they are all user-programmable. You can usually do this by inserting the key fob in the ignition two times within five seconds. If this does not work it is possible to bring your key fob to an auto locksmith or dealer to get it programmed. The cost of this service will depend on the person you contact and the type of car you own.