If your faucet won't turn off, you might want to know what to do first. Before you try replacing the entire faucet, you should turn off the faucet handle. If you still notice water flowing out, there's a leak somewhere. Replace the cartridge. This will make it easier to turn the faucet on again. To replace the entire cartridge, you'll need to replace both the valve and the washer.

Another thing you can try is replacing the stem or handle. These components are often connected to the stem with fine-toothed splines that may become stripped over time. To fix the problem, you can replace the stem and handle at the same time. To replace both, you'll need to remove the faucet handle. It's a good idea to replace the handle and stem at the same time, as they can break if you're not careful.

You might also be able to replace the handle. If the stem is broken, you can try removing it with a flat-blade screwdriver or a Phillips screwdriver. Then, you'll need to tighten the handle screw until it's firmly fastened. You can also try to turn the faucet on and off to test the fix. If this doesn't work, continue reading for other tips.

If this doesn't work, you might need to replace the valve stem. The valve stem has a small screw underneath that may have become loose. You can remove the handle using a flat-blade screwdriver or an Allen wrench. Then, you can tighten the handle screw again. Be sure to use lubricant when installing the new valve stem. When the screw is tightened, you can replace the valve stem.

The first step in fixing the faucet is to remove the stem. The stem is the most difficult part to replace. Fortunately, most faucets are easy to replace, and most parts are readily available at home improvement stores. It's best to bring an old faucet stand with you if you can't find the stem at home. Then, you can simply pull the handle out of the https://www.nivito.com and test it.

If the stem is the cause of the problem, you can try replacing it. If the stem is not the problem, you can try replacing the handle. The handles and stems of faucets are connected by fine-toothed splines. If they're stripped, they need to be replaced. If this doesn't work, you can try changing the stem first. This will usually fix the faucet problem.