Peugeot 208 Key Replacement

It is best to leave the replacement of Peugeot 208 keys to auto locksmiths with the equipment and know-how. They will be able to make and program new keys faster than a dealership would and at a lower cost.

A dead battery for your coin is most likely to be the cause if your key fob stops locking or unlocking doors. There are many other reasons for the key to be malfunctioning.

Dead Coin Battery

A dead battery can stop your Peugeot 208 from locking and unlocking, and also hindering it from starting the engine. If this is the situation, you'll need make use of the backup starting procedure which is explained in the owner's manual of your vehicle.

The spark plugs could also be worn out. The spark plugs are responsible for sparking the fuel that powers the engine. However they are limited in their time of life. If they aren't utilized enough to last, they'll eventually fail.

There is a simple solution to this issue. Check the voltage of your battery using a multimeter. If it's lower than 11.5 Volts, then you need to replace it. It is also important to clean the contacts of the battery when it has corrosion. You can do this by lifting the rubber covers that cover the two terminals on the battery and using wire brushes to clean any corroded components of the battery. Then, you must reconnect the positive pole cables to the negative.

Water Damage

If your 208 won't start and the battery is not running, then make sure that the spark plugs are working. It is possible that they're dirty, which causes them not to spark. This is easily fixed by cleaning the spark plugs in a workshop.

Peugeot automobiles are equipped with a transponder that is compatible with the immobiliser. This ensures only the correct key can turn the engine. If the chip inside the Peugeot key is damaged, it will not send the correct signal to the vehicle.

Water damage is the most common cause of this problem. This is a common issue in warmer climates where the vehicle is exposed to snow or rain. In this instance, you should contact a trusted locksmith who has the tools and equipment required to change the key's programming. https://www.g28carkeys.co.uk/peugeot-car-key-replacements-near-me/ have the most up-to-date technological know-how and machinery required to make the Peugeot 208 smart key. The process shouldn't take more than 15 minutes.

Contacts of the battery may be damaged.

Peugeot changed from the old carbon encased transponder chips to an entirely new type of chip that uses electronic components in circuit boards. The new system is excellent in its initial state, but the circuit boards wear out over time and cease to function properly.

This could prevent the immobiliser chip from activating, so your car won't start. Contact a Peugeot specialist or a locksmith if this is the situation.

Another common issue is when the battery for the key fob begins to fail, which causes the blade of the key to stop getting into the lock. A car locksmith will replace the battery and cut a new blade for you. This is a quick solution.

Faulty Receiver Module

It could be that the receiver module is faulty in the event that your Peugeot key fob isn't working after being dropped on the floor, or exposed to a stormy rainstorm, or accidentally washed. The receiver module is responsible for transmitting radio frequencies to the onboard computer that manages the central locking system of your Peugeot vehicle.

The key fob itself is fitted with rubber seals to prevent water from reaching the electronic chip inside. The chip can be damaged by water when exposed to water for a prolonged period of time. Submerging the key fob into ocean water on the beach or throwing it into the pool can be particularly damaging due to the high salt content.

The module needs to be replaced if the Peugeot spare key isn't working anymore. This should be done by an Peugeot specialist or a professional auto locksmith. Like other automobiles, Peugeot keys are protected by an immobilizer that is unique and requires the correct code for the start of the engine. This is why you should only go with a knowledgeable Peugeot locksmith to handle the task of designing and programming an appropriate replacement.

Computer malfunctioning on-board

The computer on board in your Peugeot is responsible for a number of the systems within your vehicle, from airbags to power windows. The on-board computer displays the code when something goes wrong. This code will be stored in the system until the problem is resolved. This may require the on-board computers to be replaced.

The most common reason for the airbag warning light to flash is corrosion or loose connections within the sensor. This can occur due to wear and tear, ageing or exposure to salt and moisture. It is essential to have this issue addressed as soon as you can, since an airbag that is not functioning properly could be dangerous in the event an accident.

If your Peugeot is showing a card that is not being detected error, then the battery in the key fob might be weak or dead. This could prevent the key fob from sending a signal to disable the standard immobilizer in your vehicle. You can test this by pressing the unlock button on the key fob and then trying to start your vehicle. If this does not work then the battery in the key fob is in need of replacement.