Инструкция по установке программы Techstream, установка драйвера MVCI, mini VCI на Windows 7, 8, 10 (32 и 64 бита). Скачать программу и драйвера Mini-VCI J2534 Toyota Techstream
Download: http://enmouffofi.hotelsvr.ru/?dl&keyword=mvci+driver+for+toyota-cable+201+x64&source=pastelink.net
Запускаем программу с ярлыка на Рабочем столе. Toyota TIS techstream v12. Откройте диспетчер Устройств и найдите два неисправных устройства в списке. Please note you will have to register it again if you change the region of the software for example if you are working on a Japan or US spec Toyota vehicle.
Если Вы купили кабель MINI-VCI J2534 и на диске нет распакованного драйвера, а есть только установщик MVCI Driver for TOYOTA. Recently, wanted to shut off the passenger side seatbelt warning. There is no need to connect your Toyota Techstream diagnostics cable to the PC for now.
Инструкция по установке программы Techstream, установка драйвера MVCI, mini VCI на Windows 7, 8, 10 (32 и 64 бита). Скачать программу и драйвера Mini-VCI J2534 Toyota Techstream - Если вы видите это, значит, ваш МИНИ-VCI работает под 64-битной версией Windows и может использоваться другими программами, такими как Techstream. Закрываем окно и вставляем его в поле New Key.
As it turned out, with little manual tweaking it is possible, contrary to the popular belief, to get it working under Windows 64-bit. So, I decided to share the instructions, which hopefully will save someone a headache of dealing with dual boot and virtual machines with Windows XP. Mine is actually Windows 8 x64, but for Windows 7 the configuration procedure should be identical. The content of bundled mini-CD: The Techstream, MVCI drivers and TIS Key all can be on the Internet as well. Once executed, it simply unpacks and copies the IT3System. So, the Firmware Update Tool should not be used for anything, but checking that the device is connected and working properly. Do not launch it yet. To activate it, copy the IT3System. Then wait again by the way, you'll be doing that a lot with this cable. Absence of L line connection means no support for ECU re-flashing which is not something I'm comfortable doing myself anyway. That was until I found your post, followed your directions and VOILA!! Everything works as you described. There was a few hickups with the driver update since I tried to install it before without the registry hack and got stuck with a non-working driver for the USB port but I forced it to use the driver using your method and I got thru it. I ran a health check on my wife's 2007 RX400h and everything checks out. Thanks again, you the man! Great instruction Alex, Thanks. I may have a slightly different version, most things look the same as above but not everything. I am having some trouble with step 4d, I don't see any failing devices. When I plug and unplug the MVCI cable I can see a USB device come and go, so it must be the cable. I try to install the new driver, but it says the correct driver is already installed. It try it again, same thing, Ok, maybe it is, so I move on. The firmware update tool works, and I can see the cable, so it must be good. Now 6, Registry hack. In my version, under Pass Thru Support. I haven't tried to connect to the car yet Thanks Hello everyone, I read here about how to make it work on 64bit, not sure if it helps now but when I ordered mine on ebay some time ago it was from a romanian seller and it has a custom installer: mine works on 64 bit without having to do anything, until now I tested it on win7 64 bit and 32bit and works great. Any chance you can share that installer? I got the cable installed and the firmware tool can see it. But when I connect connect it still doesn't work. This is on a Windows 8. Any chance you can share that installer? I got the cable installed and the firmware tool can see it. But when I connect connect it still doesn't work. This is on a Windows 8. Ok, I got it so that it connects now fine and I can get real-time and sensor data. However, when I go to set options it acts like it is getting a list of them and then comes back with nothing. Any ideas how to fix this? I have techstream 9.
Dengan Mini VCI clone dengan firmware 1. Чтоб обновлять блоки через CUW надо иметь зарегистрированную версию Techstream. Удаляем из папки C:Tempmvci файл MVCI Driver for TOYOTA. NOTE: NOT Compatible with Windows 7 64 bit and Windows 8. Get the latest Techstream from: There are a number of steps to getting the driver installed manually, be sure to follow ALL of them before plugging the cable in. Источник: Установка драйверов на Windows 7 x64: 1. Close all windows and restart your computer!