Peugeot 308 Key Fob Replacement

Peugeot's 308 is a bit old, but it is still appealing. It might not be the most luxurious car in its class - an Ford Focus or Volkswagen Golf will protect you from imperfections on the road - but it's a relaxing and civilised driving experience.

Here at Coded Car Keys we are often asked to replace peugeot 308 key fobs. Whether the problem is intermittent or constant the following tips will help.

Water Damage

If you accidentally drop your key fob in a pool or splash it with water when kayaking, swimming, canoeing, rafting or canyoning, it's probably to sustain water damage. Keep your key fob in a dry, dry bag each time you go outside or engage in activities that expose it to large amounts of water.

You'll also need to ensure that the fob is completely dry before opening it up and reusing it. If you notice any smells from the fob (such as industrial liquid or windshield washer fluid) It's another indication that it's been submerged.

A circuit that is wet can cause the battery's charge to be drained or even explode. If you're able to fish your key fob 308 out of whatever body of water it got stuck in it, flip the button side down and shake out as much water as possible before opening the case. Take the battery out, and then wipe the circuit board clean using a cotton swab which has been dipped in 90-percent alcohol.

Other causes why your Peugeot 308 remote entry keyless system might not work include a dead coin-cell battery or receiver module issue signal interference or a faulty chip. If none of these are the reason you can restart the system by disconnecting the 12 volt battery from your car for 15 minutes.

Dead Coin Battery

Peugeot cars are equipped with remote start that allows drivers to start their vehicle from the distance, allowing them to warm up or cool down the vehicle before they get in. This feature is extremely beneficial particularly during the cold winter months. However, there are times when the remote start system ceases working due to a variety of reasons, including the battery of a coin that is dead.

The coin-shaped battery inside the key fob can last between two and four years depending on the frequency with which it is used, the location it was purchased and how it is utilized. The date for use-by is typically written on the package or marked in the manual.

If the key fob stops working after exposure to clean tap water it is recommended to remove the battery, then clean the chip with a paper towel and isopropyl alcohol, then dry it thoroughly before replacing it. If the key fob has been exposed to soapy or salty water, it could have caused the chip to become damaged. It is necessary to replace it.

If you're not sure if the battery is defective You can test its voltage with an instrument connected to the terminals for plus and minus. If the voltage is less than 12-13 volts, then you must replace the battery. You can also reset your onboard computer by disconnecting and reconnecting the 12 volt batteries in reverse order. (positive cable first, then negative cable). The engine should start.

Faulty Receiver Module

If you're not getting the "Key Detected" message on your dashboard, it's possible that your receiver module has created a fault. It's the component that sends out an alert when your key fob is activated. It also acts as an alarm and prevents the car from starting if you don't have the correct key.

The cause could be various reasons, such as water damage or just the aging process. If the electronic chip in your Peugeot 308 keyfob has been damaged by dirty tap water it could be because the keyfob was contaminated with it. In this situation, you'll need to take the device apart and clean it thoroughly using isopropyl alcohol or an electronic cleaner. When the battery is dry you can try it again.

If https://www.g28carkeys.co.uk/peugeot-car-key-replacements-near-me/ isn't resolved the issue persists, it's a good option to consult an area Peugeot specialist or locksmith. They can use the diagnostic tool to pinpoint the issue and then fix it.

Losing your Peugeot keys to your car is a stressful experience. A professional auto locksmith can solve the issue in minutes. They can cut a new key and programme it to your vehicle, ensuring that you're ready to get out on the road as quickly as possible. Click here to locate locksmiths near you.

Faulty Electronic Chip

The electronic chip that is in the Peugeot 308 key fob plays a crucial role in the remote control system. If it becomes damaged, your car might not start or get a message saying "anti-theft active". If this occurs, the only option to fix the problem is to purchase a new key. Fortunately, auto locksmiths with experience can provide the service in the shortest amount of time.

The chip in the key fob of your Peugeot 308 could be damaged due to different reasons, including sweat, water damage or dirt. If your Peugeot key fob has been exposed to dirty or soapy water, it needs to be cleaned right away. You can wipe the electronic component using the help of a towel that is soaked in isopropyl Alcohol. Then, you need to let the battery dry completely.

Radio interference can cause the key fob's functionality to cease. This could be due to other devices use the same frequency as your Peugeot keyfob. This could be due to problems with the environment or objects close to the vehicle. If you experience this problem you should visit the Peugeot dealership.

The Peugeot 207/308 key fob is extremely delicate and requires attention. You should not drop it or throw it around. If you lose something, try to find it as soon as you can. You can reset the on-board computer by disconnecting the battery for a few minutes. Disconnect the negative cable prior to the positive.