How to Replace a Nissan Juke Spare Key
Nissan Juke is an attractive and fun hatchback with a unique engine configuration. It's quite noisy but still fun to drive.
Replace the key fob battery of your Nissan Juke every two years, or when it's low. You can do it yourself, however you'll need a few tools.
Dead Coin Battery
If the key fob in your Nissan Juke has stopped functioning, make sure you check the battery of your coin. It may be dead and need to be replaced. https://www.g28carkeys.co.uk/nissan-car-key-replacements-near-me/ is a simple fix that will take only some minutes. Flip the fob upside down so that you can access the tiny latch/release at the back. Remove the old battery and then insert the new one, ensuring sure that it is facing downwards in the fob. Line up the two halves of fob in a carefully.
The fob must be cleaned if it has been exposed to water before you can put in the new battery. This can be done using a paper towel and isopropyl alcohol or electronic cleaner, and then allow it to dry completely before re-inserting the battery.
The key fob must also to be connected with the vehicle to start it. This is done by following the instructions in the owners manual or using an OBDII scanner. If the key fob is not been paired, that is the most likely explanation of the reason it stopped functioning. It is also possible that the fob has defective chip, however this is not common. In this instance it is possible that a new receiver could be needed. If this is the case the receiver module will need to be replaced by an expert technician.
Water Damage
A key fob is battery operated, and these batteries should be replaced every two years or more, or at the first sign of the car not responding when you hit the "start" button. The rubber seals on keys protect them from water, however submerging a key fob into the pool or ocean water could damage the electronic chip. If this happens you'll require a new key from Nissan or an automotive locksmith.
If the key fob is equipped with functioning chips it's possible that the computer has lost its connection to it, and this could be the result of a variety of reasons. A simple restart of the car will fix this issue, but in the event that the key is showing the "Key ID" error message, you'll need contact Nissan or an auto locksmith for assistance.
Three of the most common causes are a dead key fob battery or a key that's not programmed, or a damaged key fob. The first two are relatively easy to resolve, and the third is difficult to pinpoint and repair on the spot, but it can usually be fixed with a bit of perseverance. WhoCanFixMyCar allows you to compare Nissan Key Replacement prices in your local area and then book your repair. It takes just minutes, and you can even read reviews from local garages, Nissan car mechanics and dealerships before you decide.
Faulty Chip
The key fob inside your Nissan Juke has a special chip that transmits a signal to the car when you turn it. If the chip is not functioning properly, it can cause the key to cease working. If this is the case the issue is only solved by replacing the key. There are a myriad of reasons your Nissan Juke's key could be defective, including water damage or a dead battery for your coin or a malfunctioning receiver module.
If your key fob stops working after a wash or bath, you need to check the chip for damage from water. Verify that the metal retaining clips on the chip are tight. Also, ensure that the chip isn't surrounded by water. If you see any indications of water damage to the electronic component, take off the battery and wipe it down with isopropyl-ethanol or electronic cleaner.
If the chip is defective If the chip is damaged, you'll have to contact your local locksmith or dealer. To find a replacement, they will require the year, model and year of your vehicle. It is also necessary to note down the VIN (Vehicle Identification Number) to ensure that the locksmith or dealer knows exactly which key you have. This will allow them to check the correct key code and ensure that they cut the correct key.
Faulty Receiver Module
The key fob sends a radio frequency signal to your car that performs several functions. It can open your trunk while you hurry with groceries to your car or start your vehicle by pressing a button on the fob. It can also open your windows and turn on the horn if you accidentally lock your keys inside the car.
If the key fob doesn't work, it may be due to a malfunction in the receiver module. The receiver modules are tuned to detect specific frequencies that match the signals sent by the Nissan key fob. If your car is equipped with a faulty receiver module, it will stop responding to any signal coming from the key fob.
Whatever the way your Nissan key fob ends up getting damaged, it is always important to have a spare in event that the key is damaged or lost. A locksmith or a dealership can program a spare key that works with your Nissan. This will allow you to avoid the hassles of losing your keys or locking them in your car.
If your Nissan Juke's key fob was exposed to rain or clean tap water, you can resolve the issue by cleaning it with isopropyl or an electronic cleaner. However, if the chip is fried then you'll need to purchase a new key fob which can be coded to your car by a locksmith or a dealer.