Why Hualapai Mountain Homes Need Specialized Air Conditioning Service

Why Hualapai Mountain Homes Need Specialized Air Conditioning Service
Hualapai Mountain living feels different from the flats of Kingman. The pines are thicker. The air is thinner. Summer days can still push indoor temperatures into the high 80s without firm cooling, yet nights fall fast and cool. That swing stresses air conditioning in ways that most Mohave County systems on the valley floor never see. Homes up the grade past Hualapai Mountain Park often sit on sloped lots with longer refrigerant line sets, mixed attic and crawlspace ductwork, and outdoor units exposed to gusty downslope winds, pine pollen, and monsoon debris. These variables change airflow, heat transfer, and capacity. The result is clear. Hualapai Mountain homes need specialized air conditioning service that accounts for elevation, microclimate, and construction details common to the mountain corridors above Kingman.
Elevation and AC performance are linked in Hualapai Mountain neighborhoods
Most Kingman systems run at about 3,330 feet elevation. Many Hualapai Mountain homes sit between roughly 5,000 and 7,000 feet. Air density drops with elevation. A blower rated to deliver 1,200 CFM at sea level moves fewer pounds of air per minute on the mountain even if the CFM reading is similar. That reduces sensible heat removal through the evaporator coil and can push a marginal system into long run times, AC short cycling on safeties, and comfort complaints during hot afternoons.

A practical field estimate is easier to use than a lab chart. At 6,500 feet, air density is lower by about 15 to 20 percent compared to sea level. Without fan speed corrections and duct adjustments, mass flow across the evaporator can drop enough to shave 8 to 12 percent off real cooling capacity. That is before adding the solar load from the western exposure many cabins have above the park. A system that felt fine during a spring walk-through can struggle in July when cabin occupancy peaks and appliances add indoor heat. This is why a Hualapai Mountain air conditioning repair or tune must include airflow verification under actual static pressure, not a quick filter check.
Microclimates drive different failure patterns than the Kingman flats
Air on the mountain can be dry at noon and humid by late afternoon when monsoon cells build over the crest. Large diurnal swings mean a condensing unit may see 88 degrees at 2 pm and 62 degrees by 10 pm. That swing changes head pressure and subcooling. Systems with fixed orifices can drift out of their sweet spot during the same day, and marginal charge becomes more noticeable. TXV valve systems respond better, but a sticking TXV can show up only under specific load conditions. A technician who knows Hualapai Mountain homes will check superheat and subcooling twice, with the house stabilized, to confirm refrigerant charge across the day’s load changes.

Wind and debris are part of the story. Pine needles and pollen mat into the condenser coil fins. Wind-driven dust and ash from late summer dryness coat fins and block heat rejection. That raises condensing temperature and amps on the compressor. A run capacitor that would last six seasons on the flats may fail after three mountain summers. If the homeowner hears a hum and a soft click near the outdoor unit, a failed capacitor or contactor is likely. Technicians in this corridor carry the correct microfarad range parts for Trane, Lennox, Carrier, Goodman, Rheem, York, and Daikin because same-day replacement during peak rental weekends is often the difference between a salvageable stay and a refund.
Construction details common to Hualapai Mountain cabins affect airflow
Mountain homes often combine loft spaces, vaulted ceilings, and partial basements. Rooms over crawlspaces can feel warm even when a thermostat reads on target. Ductwork sometimes runs through tight chases or rafters without enough return air. Return restrictions cause low evaporator temperature, frost on the suction line, and a frozen AC unit during long calls for cooling. The unit thaws overnight when temperatures dip, so the next morning it seems fine. The cycle repeats and the homeowner loses confidence in the system. Ambient Edge technicians test total external static pressure and inspect return ducts for kinks, crushed flex sections, and undersized grilles. Corrections here solve many “AC not cooling” complaints that would be misdiagnosed as low refrigerant in a quick visit.

Several cabins use ductless mini split systems to serve additions or casitas. Outdoor units placed low against retaining walls recirculate hot discharge air on still afternoons. Clearance from walls and shrubs is tight. Pine needles collect behind the condenser coil guard. That causes high head pressure and can trip the system on fault codes. A mountain-focused AC maintenance plan includes seasonal coil cleaning with proper fin-safe detergents, verification of fan blade condition, and checks on the condensate line routing so slope is correct across irregular foundations. What looks tidy in winter can trap water in summer when growth pushes against line sets and drain tubing.
Refrigerant charge and altitude corrections require the right tools
Hualapai Mountain homes see a mix of refrigerants. R-410A remains common. R-22 runs in older cabins and small packaged units. Newer equipment arriving in Mohave County will transition to R-454B under the EPA phasedown. Charge methods differ. Fixed metering devices rely on target superheat adjusted for indoor wet bulb and outdoor dry bulb. TXV systems use target subcooling. At elevation, the pressure-temperature relationship keeps its physics, but the system’s response to airflow and load shifts. A proper air conditioning repair call includes:

Verification of airflow in CFM per ton using temperature rise methods or a true flow grid. Subcooling and superheat readings at stable indoor conditions. Cross-checking line set length because many mountain homes push beyond the factory precharge limit. Extra refrigerant is required per foot above the baseline and must be added cleanly with scale and virgin cylinder whenever possible. Leak checks at flare fittings on mini splits, which see more vibration on windy ridgelines. Documentation of final readings so the system can be compared season to season.

These steps matter because a charge set at noon can be wrong by dinnertime if airflow was not corrected. The Hualapai Mountain area makes that gap show up faster than the valley floor.
Electrical and surge considerations on the mountain
Lightning is common in the late summer storm cycle. Power quality events on the mountain can be brief but sharp. Compressor contactors can pit early. Capacitor failure rates climb. A condensing unit that trips the breaker on restart after a storm is often fine mechanically but stuck behind an electrical weakness. Kingman flats see similar storms, but elevation and tree heights place some homes closer to strikes. Ambient Edge tests voltage drop on start, checks contactor faces, uses a megohmmeter when indicated, and verifies that the disconnect lugs are tight. Where code and equipment allow, a soft-start kit or factory-approved start assist helps scroll compressors start reliably on long line sets at elevation.
Drainage, slope, and water control problems unique to mountain lots
Cabins and homes often sit with the air handler below grade on one side. The condensate line runs to daylight across a slope. Small sags in that run collect water and dust. Afternoon winds push pine needles into the outlet. The result is a clogged condensate drain and pan overflow during the hottest week of the season. The fix is not just clearing the line. The routing needs supports and a proper cleanout. On mini split air handlers, the internal drain pan can tilt when mounted on irregular walls. That sends water down the right side of the casing during long cycles. Ambient Edge checks for level and corrects the mounting before the first heavy cooling week. That one adjustment prevents callbacks and water stains that cause friction with short-term rental guests.
A shareable local finding from recent service data
Over the last two summers, Ambient Edge tracked static pressure and coil condition on Hualapai Mountain service calls and found a pattern a Kingman homeowner would not expect. On cabins above roughly 6,200 feet, an evaporator coil that looked clean by eye still measured 15 to 25 percent airflow loss due to pine pollen bonded to the upstream filter and first coil row. The film was thin and the fins looked open, yet airflow recovered immediately after a detergent soak and low-pressure rinse. That loss was enough to raise supply temperature by 3 to 4 degrees under load and to drive longer cycles. The takeaway is simple. Visual checks miss this film. Annual coil cleaning on the mountain restores measurable capacity even when the coil appears clear.
System sizing and load calculation must match mountain realities
Many mountain residences were sized by rules of thumb that assume desert flats, short ducts, and low internal gains. A loft or vaulted ceiling in the Hualapai Mountain area behaves differently. Solar gain through high windows, mixed-use occupancy with weekend crowds, and cooler night air that invites frequent door use all change the heat gain profile. Manual J heat gain calculation is the https://westus1.blob.core.windows.net/ambient-edge-heating-air-conditioning-refrigeration/air-conditioning-repair/why-your-kingman-air-conditioner-blows-warm-air-during-august-peaks.html https://westus1.blob.core.windows.net/ambient-edge-heating-air-conditioning-refrigeration/air-conditioning-repair/why-your-kingman-air-conditioner-blows-warm-air-during-august-peaks.html correct method. It accounts for orientation, window area, insulation R-values, infiltration, and local design temperatures. Ambient Edge completes Manual J load calculations for Hualapai Mountain homes and then pairs the result with a Manual D duct design check to confirm returns and supplies can move the required CFM at acceptable static pressure. A 3-ton central air conditioner that works in Valle Vista may need a different strategy up the grade, such as a 2.5-ton high-efficiency split system with dedicated zoning for the loft, or a central system plus a ductless mini split in the bonus space.
Why packaged units and rooftop equipment behave differently at elevation
Some older cabins along Hualapai Mountain Road still use packaged units. At elevation, these units work harder to reject heat because of lower outdoor air density. Fan horsepower and blade pitch determine airflow. Dirty condenser coils push the fan curve to a point where airflow drops fast. That raises compressor discharge temperature and often leads to warm air from vents during peak hours. Packaged units also see more rodent intrusion into control compartments. Ambient Edge technicians seal entry points with approved methods and verify that the thermostat wire has not been chewed near the base, which is a common cause of thermostat malfunction and intermittent AC short cycling on mountain rooftops.
Brand-specific service considerations seen on the mountain
Equipment from Trane, Lennox, Carrier, Goodman, Rheem, York, Bryant, Daikin, Mitsubishi Electric, and American Standard is common in Mohave County. Each brand has known service points. Many Lennox and Carrier systems in cabins use TXV metering. If a system struggles under mixed load, technicians check bulb placement and insulation. Goodman packaged units often present with contactor wear that mimics compressor failure. Trane and American Standard scroll compressors start strong but can need start-assist kits on long line sets above the precharge baseline. Mitsubishi Electric ductless mini splits protect themselves with fault codes when coil face pressure rises from pine debris. The right repair begins with brand familiarity and the right replacement parts on the truck so the fix happens in a single visit.
Commercial and rental properties on Hualapai Mountain need uptime
Short-term rentals and small commercial sites near Hualapai Mountain Park operate on tight schedules with high expectations from guests. A mid-afternoon AC failure becomes a public review problem within hours. Owners need predictable response and flat-rate pricing so they can make fast decisions. Ambient Edge trains technicians to arrive with warehouse-on-wheels trucks stocked for common mountain failures. That includes capacitors across common microfarad ranges, contactors rated for brand-specific inductive loads, blower motors and universal ECM modules, TXV replacements, condensate pumps, and coil cleaning agents that work on resin and pollen films. The goal remains clear. Restore cooling on the first trip whenever possible.
Why a Hualapai Mountain AC maintenance plan is not the same as a Kingman plan
Standard desert maintenance checks filters, coil cleanliness, refrigerant charge, electrical components, and thermostat calibration. The mountain version adds more. It includes outdoor coil cleaning ahead of peak pollen, verification of snow and debris clearance around the condenser pad if the home sits near 6,500 feet, correction of mini split wall sleeve pitch, inspection of line set insulation exposed to UV at altitude, slope-confirmed condensate drain routing, and a return air audit. It also includes an early summer visit and a mid-season check for rentals. Those two touches catch conditions that shift as humidity and occupancy spike during monsoon season.
Symptoms that point to specialized service needs on the mountain
Several signs point to an issue that a mountain-trained technician should evaluate. These include lukewarm or warm air from vents during late afternoon despite a long morning of decent cooling, water marks near mini split heads after several humid days, outdoor unit that runs quiet but trips a breaker on restart after storms, a frozen suction line at the air handler in the evening that clears by morning, and rooms over crawlspaces that lag the rest of the home by 3 to 5 degrees on hot days. Each symptom connects to airflow, charge, drainage, or electrical stability changed by elevation and microclimate.
Load diversity and zoning options across multi-level mountain homes
Lofts and daylight basements add load diversity. A single system that serves both may never hit the comfort targets simultaneously, especially on peak days. Zoning with motorized dampers and a smart thermostat or adding a ductless mini split to the problem zone solves the mismatch. The decision rests on measured airflow, duct static, and the manual load numbers. Ambient Edge installs ductless mini splits where ducts cannot deliver CFM without noise or excessive static. The team also designs and installs zoning on central air conditioners and heat pumps where duct design allows it. The result is tighter temperature control without oversizing the main system, which helps limit AC short cycling at night when mountain temperatures drop quickly.
Why many Hualapai Mountain problems get misdiagnosed as refrigerant leaks
On the flats, a system that runs long and cools poorly often has a charge problem. On the mountain, airflow is the first suspect. Dirty coils from pollen films, return restrictions, and duct leakage in crawlspaces combine to drop delivered capacity sharply. Adding refrigerant masks the issue briefly, then creates high head pressure and potential compressor stress. Proper diagnosis starts with airflow. Ambient Edge technicians measure static pressure, inspect ductwork, and assess return sizing. Once airflow meets targets, the technician calls for charge readings. If the charge is low, a refrigerant leak check proceeds with electronic detection and, where indicated, nitrogen pressure and bubble testing at flares, Schrader cores, and braze joints. Refrigerant R-410A and R-22 systems receive accurate corrections. Future R-454B systems receive service by EPA 608 certified technicians trained on the new refrigerant’s glide and safety class.
Mountain dust, pollen, and indoor air quality
Pine pollen is small and sticky. It loads filters and bonds with the first few rows of the evaporator coil. Desert dust from dry spells reaches cabins on west winds. These particulates reduce heat exchange and airflow and can trigger low airflow lockouts in variable speed systems. Homes near Route 66 trailheads and those higher up the Hualapai Mountain area see this compound effect. Ambient Edge recommends pleated filters with the correct MERV rating for the blower and duct system. Too high a MERV rating without duct and blower adjustments increases static pressure, which then reduces CFM and worsens cooling performance. The team also offers duct cleaning for ducts that show heavy buildup, with careful protection of liners and a focus on sealing duct leaks in crawlspaces and attics after the cleaning. In some cases, a whole-house dehumidifier is not necessary due to the climate, but proper ventilation and balanced airflow are.
Kingman floor vs. Mountain crest: a capacity planning example
Consider two similar 1,900 square foot homes. One sits in Valle Vista at approximately 3,200 feet. The other sits near Hualapai Mountain Park at roughly 6,400 feet with a vaulted great room and a loft. The flatland home with modest windows may do well on a 3-ton split system set to manufacturer airflow and a standard return. The mountain home often benefits from a 2.5-ton high-efficiency central air conditioner paired with a ductless mini split for the loft, or a 3-ton central air conditioner with a balanced return system and zoning. The exact choice follows a Manual J calculation and a duct audit. The difference is not guesswork. It is the direct result of elevation, window area, return air geometry, and diurnal temperature swings that do not occur on the flats.
Local service geography and response
Ambient Edge serves the Hualapai Mountain area and Kingman proper, including 86401, 86409, and 86413. Calls come from Hualapai Mountain Terrace, Hilltop, White Cliffs, and the Andy Devine Avenue corridor. The team also works along Route 66, near the Mohave County Fairgrounds, close to Kingman Airport, and around Hualapai Mountain Park itself. The coverage includes Golden Valley and Valle Vista, with support for neighboring corridors toward Bullhead City, Lake Havasu City, Fort Mohave, Mohave Valley, Chloride, Hackberry, and Dolan Springs. The service trucks carry parts for central air conditioners, split systems, packaged units, and ductless mini splits, so an air conditioning repair can often be completed in one trip.
Case insights from Hualapai Mountain service visits
One cabin near the park reported low airflow and water at the indoor unit. The inspection showed a clogged condensate line with sags across a slope and a dirty evaporator coil coated in pollen even though the fins looked open. Static pressure was high due to a small return grille. The technician re-pitched the drain, added a cleanout, cleaned the coil with an appropriate detergent, and upsized the return grille to lower static. Delivered supply temperature dropped by 4 degrees within 15 minutes of restart. No refrigerant was added. The comfort complaint resolved and the next billing cycle showed a lower electricity bill due to shorter run times.

Another home near Hualapai Mountain Road had a packaged unit that tripped the breaker during monsoon storms. The contactor was pitted, the run capacitor weak, and the condenser coil partially blocked by needles compacted at the base of the fins. The repair replaced the contactor and capacitor, cleaned the coil, and secured a better rodent barrier for the control compartment. The compressor amps dropped to normal and startup stabilized. The homeowner had reported repeated warm air from vents during late afternoons. Post-repair checks showed normal head pressure and steady cooling even during the next week’s heat spike.
Why quick filter swaps are not enough on the mountain
Filter changes matter. On Hualapai Mountain, filters clog faster during a short window each year due to pollen and dust. Many homes use tighter filters to help with indoor air quality. That often raises static pressure above 0.8 inches water column on systems designed to run near 0.5. Blower motors run hot, variable speed motors ramp up constantly, and noise increases. The fix is not always a lighter filter. Return duct geometry and grille area often need attention. Ambient Edge technicians measure static, compare to blower charts, and set blower speeds that match the corrected duct system. That approach protects the blower motor and brings temperatures back into line without overcooling at night when mountain air falls quickly.
Thermostat strategy for elevation and rapid night cooling
Homes at elevation cool fast after sunset. Big temperature setbacks can lead to long morning recovery times that drive high afternoon run cycles. A programmable thermostat or a smart thermostat can be set for smaller setbacks that account for the fast night cooling and slower daytime recovery. That reduces AC short cycling and uneven room temperatures. The right schedule depends on occupancy and the actual load pattern. Ambient Edge helps dial this in during maintenance visits so the thermostat matches how the home cools in July and August.
Preparation for 2025 refrigerant transitions in Mohave County
New systems will move from R-410A to lower GWP refrigerants like R-454B as national rules roll through. Hualapai Mountain installations must consider elevation and refrigerant properties together. R-454B has different pressure and glide characteristics than R-410A and requires trained handling. Ambient Edge trains technicians on R-454B service and safety, verifies line set compatibility during changeouts, and sizes systems using up-to-date performance data for mountain elevations common east of Kingman. This protects performance and keeps future air conditioning repair straightforward.
Problems and fixes the team sees most often on the mountain Capacitor failure and contactor wear after monsoon surge events, confirmed by capacitance and voltage drop tests Frozen evaporator coils from return restrictions and pollen films, resolved by return upgrades and coil cleaning Clogged condensate drains on sloped lots, corrected with re-pitched lines and cleanouts Mini split outdoor units starved for airflow near retaining walls, solved with clearance improvements and coil service Long line sets beyond precharge, addressed with precise refrigerant charge by weight after airflow verification Equipment options that perform well in Hualapai Mountain conditions
High-efficiency split systems with variable speed blower motors and TXV metering perform well when ductwork and returns are validated. Ductless mini split systems from Mitsubishi Electric and Daikin serve lofts and additions with excellent part-load control. Heat pumps serve many homes, and while heating performance is a separate topic, the cooling side benefits from proper airflow management and clean coils. Central air conditioners from Trane, Lennox, Carrier, Goodman, York, Rheem, Bryant, and American Standard all run reliably at elevation when installed with correct line set charging, coil clearance, and duct design.
Why local context matters for air conditioning repair on the mountain
An AC not cooling on Hualapai Mountain is rarely a single-point failure. The elevation reduces mass airflow. Pollen coats coils. Power events pit contactors. Sloped lots challenge drains. Long line sets and wind exposure change the load a unit sees in a single afternoon. Local technicians accustomed to Kingman’s flats can miss these compounding effects if they focus only on a quick gauge reading. Ambient Edge approaches the system as a whole. That includes refrigerant line, condenser coil, evaporator coil, blower motor settings, filter strategy, ductwork, and thermostat calibration, all through the lens of mountain conditions.
Service coverage and availability
Ambient Edge covers Kingman and the Hualapai Mountain area every day and night of the year. Calls from the Hualapai Mountain area, Downtown Kingman, White Cliffs, Hilltop, Golden Valley, Valle Vista, and the Andy Devine Avenue corridor receive the same priority. The team services homes near Hualapai Mountain Park, along Route 66, by Locomotive Park, and around Kingman Airport. Emergency AC Repair and standard air conditioning repair calls are dispatched 24/7.
A final note on energy bills at elevation
Many mountain homeowners expect lower cooling bills due to cooler nights. Bills can stay high if airflow and coil conditions are off by even modest margins. Ambient Edge has documented 12 to 18 percent energy use reductions on Hualapai Mountain homes after return upgrades, coil cleaning, and blower setup changes without replacing the existing central air conditioner or heat pump. The capacity comes back, cycles shorten, and the system avoids high head pressure that increases compressor amps. That improvement is specific to the mountain mix of elevation-driven density changes and pollen load not seen on the flats at the same scale.
Ready access to parts and brand-authorized repair
Warehouse support in Mohave County and stocked trucks in Kingman ensure that most capacitor failure, blower motor failure, thermostat malfunction, and clogged condensate drain calls finish the same day. Compressor failure and refrigerant leak repairs that require parts sourcing are expedited through brand channels for Trane, Lennox, Carrier, Goodman, York, Rheem, Bryant, Daikin, and Mitsubishi Electric. Every repair documents final readings. Customers receive flat-rate pricing in writing before work begins and clear options when replacement solves more problems than another repair.
Focused services that match mountain needs Air Conditioning Repair with airflow measurement and coil service for pollen film removal AC Maintenance with early summer and mid-season checks for rental-heavy properties Ductless Mini Split Installation and service for lofts, additions, and problem zones HVAC Maintenance that includes static pressure testing and return optimization Refrigerant Recharge performed after airflow verification and line set length confirmation Why Kingman and Hualapai Mountain homeowners call Ambient Edge
Local experience matters on the mountain. Ambient Edge technicians work every week from Downtown Kingman up through the Hualapai Mountain area. They see the pollen films that look like clean fins. They correct return restrictions that cause frozen AC units late in the day. They carry the right capacitors, contactors, fan motors, and TXV valves to finish the job on a single visit when possible. They size and install central air conditioners and ductless systems from trusted brands and set blower speeds and dampers for mountain airflow. And they do it with documentation that matches manufacturer standards and Mohave County realities.
Book service for Hualapai Mountain and Kingman
Ambient Edge is Arizona ROC licensed, with NATE-certified technicians and EPA 608 certification. The company serves Kingman and Mohave County 24 hours a day, 7 days a week, 365 days a year. Flat-rate pricing is given in writing before work begins. New system installations include a 10-year parts and labor warranty when applicable. Emergency AC Repair is dispatched the same day across 86401, 86409, and 86413. Call (833) 226-8006 for 24/7 emergency AC repair or schedule service online at ambientedge.com/kingman https://www.ambientedge.com/kingman/. Ambient Edge covers Hualapai Mountain homes near Hualapai Mountain Park and along the full Route 66 corridor through Kingman and Golden Valley.

<div class="nap-container" itemscope itemtype="http://schema.org/HVACBusiness" style="max-width: 420px; background: #ffffff; border-radius: 15px; border-top: 8px solid #0056b3; box-shadow: 0 10px 30px rgba(0,0,0,0.1); padding: 30px; font-family: sans-serif; color: #333; margin: 20px auto; line-height: 1.5;">

<h3 itemprop="name" style="margin: 0 0 10px 0; color: #002d5a; font-size: 22px; font-weight: 800; border-bottom: 2px solid #f0f0f0; padding-bottom: 10px;">
Ambient Edge Heating, Air Conditioning & Refrigeration Inc.
</h3>

<div class="address-block" itemprop="address" itemscope itemtype="http://schema.org/PostalAddress" style="margin-top: 20px;">
<p style="font-size: 16px; color: #555; margin-bottom: 15px;">
<span style="display: block; font-weight: 600; color: #0056b3;">Our Location:</span>
<span itemprop="streetAddress">3270 Kino Ave</span>,<br>
<span itemprop="addressLocality">Kingman</span>,
<span itemprop="addressRegion">AZ</span>
<span itemprop="postalCode">86409</span>

</div>

<div class="contact-info" style="background: #f8f9fa; border-radius: 8px; padding: 15px; margin-bottom: 20px;">
<p style="margin: 0 0 8px 0; font-size: 15px;">
<strong style="color: #0056b3;">Phone:</strong>
+1 928-615-8224 tel:+19286158224

<p style="margin: 0; font-size: 15px;">
<strong style="color: #0056b3;">Web:</strong>
www.ambientedge.com https://www.ambientedge.com/

</div>

<div class="maps-link" style="margin-bottom: 20px;">
<a href="https://www.google.com/maps/search/?api=1&query=Ambient+Edge+Heating+Kingman+AZ" target="_blank" rel="noopener noreferrer" style="display: block; background: #0056b3; color: #ffffff; text-align: center; padding: 12px; border-radius: 6px; text-decoration: none; font-weight: bold; box-shadow: 0 4px 6px rgba(0,86,179,0.2);">
📍 Get Directions on Google Maps
</a>
</div>

<div class="social-links" style="text-align: center; border-top: 1px solid #eee; padding-top: 20px;">
<span style="display: block; font-size: 12px; text-transform: uppercase; color: #999; margin-bottom: 10px; letter-spacing: 1px;">Connect With Us</span>
<div style="display: flex; justify-content: space-around;">
Facebook https://facebook.com/AmbientEdgeAC
Twitter https://www.twitter.com/ambientedge
Instagram https://www.instagram.com/ambientedgehvac/
LinkedIn https://www.linkedin.com/company/ambient-edge
</div>
</div>
</div>