Furnace Installation London Ontario Cost Guide and What to Expect

13 June 2026

Replacing or installing a furnace in London, Ontario is one heating and cooling london ontario http://www.bbc.co.uk/search?q=heating and cooling london ontario of those projects where a little planning saves real money and future headaches. Our winters are long, damp, and routinely dip below minus 15, with design days near minus 21. A furnace that is sized and installed correctly keeps a house even-tempered on the coldest nights and does it without chewing through gas. A poor match shows up in noise, hot and cold spots, nuisance faults, and higher bills. After two decades working with heating and cooling in Southwestern Ontario, I have learned that the quality of the installation influences your comfort and total cost more than the logo on the furnace door.

This guide explains what furnace installation in London, Ontario typically costs, what affects pricing, how to compare quotes, and what to expect from your first site visit to the final walkthrough. It also covers when furnace repair still makes sense, and when replacement is the safer, more economical choice.
Typical installed costs in London, Ontario
For a straightforward changeout, most London homeowners spend between CAD 4,500 and 8,500 for a high-efficiency condensing gas furnace, fully installed. That range assumes you are replacing an older furnace with an equivalent size, reusing most of the existing ductwork, and adding standard PVC venting to the exterior if your current unit is not already vented outdoors. Prices climb with larger homes, premium features, and add-ons.

Here is how the numbers usually break down in the real world:

Entry high-efficiency systems, 95 to 96 percent AFUE, single-stage burners with a multi-speed blower, land around 4,500 to 6,000 installed in a typical detached home. These are reliable workhorses, especially in smaller or well-insulated houses.

Mid-range systems, usually two-stage with ECM variable-speed blowers and 96 to 97 percent AFUE, run about 5,500 to 9,000 installed. The two-stage operation reduces temperature swings and can be quieter, a noticeable upgrade in many homes.

Premium variable-capacity systems paired with communicating controls can go from 8,000 to 12,000 or more installed, particularly if you add a media filter cabinet, humidifier, or smart thermostat. The comfort is outstanding in tricky homes with airflow challenges, but the payback is primarily comfort-driven rather than fuel savings alone.

For edge cases, like replacing a mid-efficiency chimney-vented unit in a finished basement with no easy vent route, or fixing badly undersized return air, plan a cushion. Complex jobs, including significant duct modifications, condensate pumps and drains where none exist, or a new dedicated electrical circuit, can push totals into the 9,000 to 14,000 range. I have also seen changeouts under 4,500 in small, simple homes with competitive timing and few extras, though that is less common.

All figures above include equipment, standard installation materials, permit or licensing compliance, and labor. HST is usually extra on quotes unless explicitly shown.
What drives price up or down
If two quotes are two thousand dollars apart, there is almost always a reason. The furnace model matters, but installation scope and details often explain more of the gap than the badge.

Capacity and blower type. For London’s climate, many detached homes land between 60,000 and 100,000 BTU input, though modern, well-sealed homes often need less. Bigger furnaces cost more. An ECM variable-speed blower adds a few hundred dollars compared to a basic multi-speed motor, but it pays you back in comfort and slightly lower electrical consumption.

Venting and drains. High-efficiency furnaces use two-pipe PVC venting and produce condensate. If you already have exterior PVC venting from a previous upgrade, your installer might reuse the route with new pipe. Otherwise, expect wall coring, vent terminations, and a drain connection to a floor drain or condensate pump. Finished basements sometimes mean more labour for clean routing.

Electrical and controls. Swapping a 20-year-old furnace for a modern unit means verifying wiring, breaker capacity, and thermostat compatibility. A simple thermostat upgrade is simple. Adding a C-wire, relocating a control cable, or tying in a whole-home humidifier and media filter can add modest cost and time.

Ductwork corrections. London has plenty of split-levels and mid-century homes where duct design was an afterthought. If your return air is undersized, your installer may recommend adding a return drop or a few larger grilles. Minor duct corrections often cost a few hundred dollars and make a big difference in noise and airflow.

Access and timeline. Tight mechanical rooms, sloped walk-ups, or snowbound vent terminations take longer. Emergency same-day replacements during a cold snap can carry a premium because crews work overtime and suppliers run inventory hot.

Warranty and labor coverage. Most major brands offer 10-year parts and lifetime heat exchanger warranties when registered. Labor coverage varies. Standard labor warranties run one to two years, and extended labor protection for 10 years costs extra. The price difference between quotes often hides here.

Contractor quality and aftercare. A company that pays for ongoing training, performs a proper load calculation, and offers a post-install airflow check may not be the cheapest, but it often saves you callbacks and frustration. You are buying craft as much as equipment.
Local codes, permits, and what a compliant install looks like
In Ontario, gas work must be performed by a TSSA-registered contractor using licensed technicians. The work follows the CSA B149 gas code and applicable sections of the Ontario Building Code. For a like-for-like furnace replacement in London, a city building permit is typically not required for the mechanical equipment alone, but electrical work is subject to the Electrical Safety Authority. If a new circuit, disconnect, or wiring changes are involved, an ESA notification should be filed. Your contractor should handle TSSA and ESA paperwork where required and provide proof upon request.

A clean, code-compliant installation in your home will look like this:

PVC intake and exhaust terminate outside with proper clearances from windows, grade, and fresh air intakes. Vent pipes are properly supported and sloped back to the furnace so condensate drains to the trap.

A condensate trap, neutralizer if required by local waste rules or homeowner preference, and a secure drain to a floor drain or a condensate pump. Tubes are neatly routed and labeled.

Gas piping includes a shutoff valve, drip leg where required, and uses approved materials and thread sealant. The installer performs a leak test and pressure drop test.

Combustion analysis is recorded after commissioning, with readings for oxygen, carbon monoxide, stack temperature, and efficiency. You should receive those numbers.

Electrical bonding and grounding are correct. The furnace has a dedicated service switch in sight and the blower door safety switch functions.

Duct connections are sealed with mastic or UL-listed foil tape, not cloth duct tape. Filter cabinet is square and accessible. If a high MERV filter is installed, the return duct has enough area to keep static pressure in check.

That list is not just for show. In my experience, 80 percent of persistent noise and comfort complaints trace back to airflow and venting shortcuts. Ask the installer to walk you through these details. The best ones are proud to.
Choosing the right size and type for a London home
Sizing is both math and judgment. The math is a heat loss calculation, often done with HRAI or ACCA Manual J principles. It accounts for your home’s area, insulation, windows, air leakage, and design temperature. The judgment comes from reading a house that has seen decades of additions, partial renovations, and changing occupancy.

A few practical sizing notes for our area:

Oversizing is common. A 120,000 BTU furnace in a 1,600 square foot, reasonably tight house will short cycle. You will get bursts of hot air, then longer off times, and likely hear the ducts. Comfort is worse, and parts wear faster. Many of those homes are well served by 60,000 to 80,000 BTU input with two-stage or variable capacity.

Two-stage and variable capacity units improve shoulder-season comfort. London has long stretches around freezing where a single-stage unit switches on and off frequently. With staging, the furnace runs at a lower fire most of the time. Heat feels steadier, and noise drops.

AFUE above 95 percent is now standard. Canada’s minimum efficiency for new gas furnaces is in the high-efficiency, condensing category. Chasing 98 percent AFUE over 96 percent rarely pays back on gas savings alone, though it may come packaged with quieter blowers and better controls.

Consider indoor air quality. A proper media filter cabinet with a MERV 11 to 13 filter reduces dust without starving the blower, as long as the return is sized right. Add a humidifier if winter dryness cracks skin and wood. Coordinate these with the furnace purchase, not as an afterthought.
When furnace repair is the smarter move
London has a healthy community of experienced service techs, and furnace repair in London, Ontario can be a very cost-effective path if the Hop over to this website https://holdendxjm012.iamarrows.com/furnace-repair-london-ontario-avoid-breakdowns-with-seasonal-tune-ups unit is not at the end of its life. A few rules of thumb from years in the field:

Age and heat exchanger condition rule the decision. A cracked or rusted-through heat exchanger means replacement, full stop, because of carbon monoxide risk. If your furnace is over 15 years old and it needs a major component, think hard about investing further.

Common repair costs in our market: A hot surface igniter runs roughly 150 to 300 installed. A pressure switch or flame sensor is similar. Draft inducer assemblies tend to be 400 to 900, depending on availability. Control boards commonly land between 450 and 900. Blower motors vary widely; a PSC motor might be 450 to 800, while an ECM motor can run 900 to 1,800 installed. Prices swing with brand, part sourcing, and how hard it is to access the component.

Frequent nuisance lockouts on a relatively young, properly sized furnace are often fixable. Vent slope issues, condensate clogs, and poor ground connections are cheap to address once diagnosed. Do not scrap a six-year-old 96 percent furnace over a drain line that freezes at the termination.

Talk about duct fixes during repair visits. If your return duct is underfed, a tech can often propose a small modification that quiets the system and improves heating, without replacing the furnace.

As with installation, fast winter service calls may carry after-hours premiums. A service company that handles both furnace repair and furnace installation has a wider set of options for you and can price both paths transparently.
What to expect from the process, step by step
The smoother jobs I have seen all begin with a proper site visit. A good contractor arrives with a digital manometer, tape, flashlight, and time to listen. They will ask about rooms that run cold, any noise you hear, recent hydro and gas bills, and whether you have plans to finish a basement or add an addition. From there, the path usually looks like this:

The quote. Expect a written scope describing the furnace model and size, blower type, venting route, return and supply modifications if needed, filter cabinet, humidifier or thermostat additions, and warranty terms. If one proposal is two pages longer than another, it is probably more thorough. Length is not everything, but details reduce misunderstandings.

Scheduling. Non-emergency installations are usually booked within 3 to 10 days, faster during shoulder seasons. In a deep freeze, same-day or next-day changeouts are common, often with temporary heat provided if something unusual delays completion.

The workday. Most changeouts take 4 to 8 hours with two technicians. Complex venting or duct changes can run into a second day. Expect some noise, trips in and out for disposal and materials, and careful sheet protection through finished areas. Good crews clean as they go to keep dust down.

Commissioning and training. After power up, techs measure gas pressure, temperature rise, static pressure, and do a combustion analysis. They should log readings, label the filter size and direction, and walk you through thermostat controls and maintenance points. Ask what normal sounds like, and what is not normal.

Paperwork and aftercare. You should receive an invoice with full model and serial numbers, warranty registration confirmation, and any ESA or TSSA documentation. Many firms include a complimentary first-year maintenance or a discounted tune-up in the first heating season.

Here is a simple homeowner prep list that helps the day go smoothly:
Clear a path 36 inches wide from the entry to the mechanical room. Move storage items at least three feet from the furnace and electrical panel. Identify the preferred vent exit location if the basement is finished. Provide parking space close to the entry for equipment handling. Secure pets and plan for doors opening and closing during the day. Comparing quotes without getting lost in jargon
Nothing tests patience like three quotes with different models, similar efficiency ratings, and a thousand-dollar spread. Focus on a few comparables and it becomes manageable.

Model and staging. Note AFUE, staging (single, two-stage, variable), and blower type. Compare like to like. A two-stage ECM system should be compared to another two-stage ECM, not a basic single-stage.

Scope of work. Look for line items on venting, condensate management, duct modifications, filter cabinet type, thermostat, and any electrical updates. If the cheapest quote is silent on these, it may assume reusing parts that are due for replacement.

Labor warranty. A 10-year parts warranty is standard with registration. Labor coverage varies dramatically. Ask for the length and what is covered, including diagnostic time and travel.

Commissioning and verification. Insist on documented combustion and airflow readings and a post-install walkthrough. This is your leverage if something needs adjustment.

Payment terms and timing. Clarify deposit, progress payments if any, and lead time. If you are exploring financing or rentals, request the total cost of ownership over the term, not just the monthly number.

For quick side-by-side comparisons, this short checklist keeps the essentials in view:
Are the furnace capacity and staging the same across quotes? Do all quotes include new venting, filter cabinet, and thermostat compatibility? What duct modifications are proposed, if any? How long is the labor warranty, and who honors it? Are permits and commissioning measurements specified in writing? Rentals and financing in the London market
Ontario has a long history of HVAC rentals and long-term financing. I have seen rentals make sense for landlords who prize quick service and simple accounting, but many homeowners do better with straightforward financing or paying cash. Before signing a rental, calculate the total monthly payments over the entire term and compare that to an outright purchase with an extended labor warranty. A rental that looks easy at 69 a month can total more than double the installed price over time, and buyout terms can be unfriendly. If you go the rental route, get the buyout schedule in writing and understand service response times and what happens if you sell the home.

For financing, many London heating and cooling companies offer 0 percent short-term promotions or longer terms between 6.9 and 9.9 percent. Scrutinize admin fees. Sometimes a bank line of credit beats dealer plans, especially if you can pay it off early without penalty.
Rebates and incentives, with a reality check
Rebate programs change frequently. Some high-profile national grants have come and gone, and criteria shift with funding. For gas furnaces, incentives are limited compared to heat pumps. It is worth checking a few credible sources before you decide:

Enbridge Gas occasionally runs efficiency or weatherization programs for eligible customers. Availability varies and may focus on whole-home upgrades rather than equipment swaps.

The Independent Electricity System Operator (IESO) and London Hydro sometimes offer thermostat or winter peak-management incentives that pair well with a new system.

The City of London has promoted home energy retrofits and financing pilots in the past. Ask about local options tied to building envelope improvements.

When a salesperson promises a rebate, ask for a direct link to the program page and a written estimate that shows the pre-rebate price and any application service fee. If a rebate requires pre-approval, do not schedule installation until that step is complete.
Cold-climate realities that shape your choice
London’s damp cold finds the weak points in a system that looks fine on paper. A few local lessons:

Pay attention to vent terminations. Snow drifting against a low sidewall termination can shut a furnace down. Terminate above anticipated snow levels and avoid alcoves that trap exhaust.

Protect condensate lines. Pipes that run near a foundation wall can freeze in a cold snap. Proper slope, insulation where exposed, and short runs to a warm drain or pump prevent winter no-heat calls.

Size returns generously. Many homes have a single return on the main floor and a starved basement return. A second return or upsized grilles quiets airflow and reduces motor strain. This matters more once you install a high-MERV filter.

Keep fresh air in mind. If your furnace replaces a naturally aspirated unit, your home’s pressure dynamics change. Make sure any combustion appliances left on chimneys are safe and that makeup air provisions are correct.
The installation day, through a homeowner’s eyes
On a typical winter morning changeout in Old North, the crew arrives just after eight. They lay runners from the front door to the basement stairs and set a cardboard mat around the mechanical area. While one tech shuts off gas and power and begins disconnecting the old unit, the other starts staging materials. You will hear a reciprocating saw briefly as they separate the return drop. The old furnace tips onto a dolly and heads out, and the new cabinet arrives in two pieces if the stairwell is tight.

By late morning, the cabinet is set, leveled, and tied into the return and supply transitions. A tech runs new 2-inch PVC for intake and exhaust along the joist bay, drills a neat hole through the rim joist, and installs a termination kit high enough to clear most snowfalls. The condensate trap and line lead to the floor drain, with a small neutralizer cartridge if your home has sensitive piping. Electrical lands on the existing disconnect, and a new thermostat wire gets fished to the living room to bring a C-wire to your smart stat.

After lunch, they fire the unit, check gas pressure, dial in the blower speed to hit the manufacturer’s temperature rise spec, and measure static pressure to confirm the duct system is not choking the blower. The combustion analyzer shows carbon monoxide in the flue gas well within expected limits. They label the filter size on the cabinet, set the humidifier control, and walk you through filter changes and what to expect on a defrost-like steam plume from the exhaust on cold days. By four, the floors are vacuumed, debris is loaded, and you have a warm house with a quiet, steady wash of air.
Maintenance and what keeps warranties intact
Even the best installation benefits from simple upkeep. Change or wash filters on schedule. For 1-inch filters, check monthly and change every 60 to 90 days during heavy use. For 4 to 5-inch media, every 6 to 12 months is typical. Have a professional tune-up annually or at least every two years. A proper service includes cleaning the flame sensor, inspecting the condensate trap and lines, checking venting integrity, verifying gas pressure and temperature rise, and running a combustion analysis. Keep documents. Manufacturers can request proof of maintenance for certain warranty claims.

If your home is particularly dusty during renovations, expect to change filters more often and consider temporarily using a slightly lower MERV to protect airflow, then return to a higher grade after the dust settles. Watch for signs like frequent cycling, new rattles, or a musty smell near the furnace. Early attention prevents bigger issues.
How heating and cooling companies in London add value
A reputable local company brings more than a catalog. Experience with our housing stock matters. Wortley Village brick homes leak differently than newer homes in Fox Field or Summerside. Installers who know the quirks of these builds set expectations accurately and anticipate problems. A firm that handles both furnace repair London Ontario and full furnace installation can pivot if, during a repair call, they discover a cracked heat exchanger. They can also keep a customer comfortable with temporary heaters and quick scheduling when a replacement is necessary.

If you are starting from scratch, ask neighbors for references, read recent reviews with an eye for how the company handles problems, and look for technicians with recognized certifications. A shop that invests in training, keeps parts on hand for common brands, and offers a transparent line to a service manager when something goes wrong is worth a little more.
Final thoughts from the field
The best furnace for a London home is the one that is sized with care, installed cleanly, and supported by a company that picks up the phone after the cheque clears. High-efficiency units are the baseline now. The difference maker is in airflow, venting, and attention to detail. Expect to spend 4,500 to 8,500 for a quality installation in a typical home, more when the house or the wish list is complicated. If repair is on the table, do the math against age and safety. Ask for commissioning numbers, not just reassurances. If a quote feels vague, it probably is.

Heating and cooling London Ontario is not one-size-fits-all. A detached home near UWO with thick brick and original plaster is not the same as a modern build in Hyde Park with spray foam and tight windows. A skilled contractor recognizes that, and your quotes should reflect it. When furnace installation choices are made with a clear eye on the house in front of you, winter becomes a season to enjoy indoors, not endure.

<h2>Hometown Heating and Cooling — Business Info (NAP)</h2>

Name: Hometown Heating and Cooling

Website: https://www.hometownhc.ca/ 
Email: sales@hometownhc.ca 
Phone: (519) 425-0555

Service Area: London, Woodstock, and Ingersoll (Southwestern Ontario)

<h3>Ingersoll Location</h3>
Address: 113 Mutual St N, Ingersoll, ON N5C 1Z8 
Map/listing URL: https://www.google.com/maps/place/Hometown+Heating+and+Cooling/@43.042608,-80.8860254,17z/data=!3m1!4b1!4m6!3m5!1s0x882e9bfee0d53bf3:0x9f78b1810f24ad23!8m2!3d43.0426041!4d-80.8834505!16s%2Fg%2F1tdgqgkq 
Embed iframe: 
<iframe
width="100%"
height="450"
style="border:0;"
loading="lazy"
allowfullscreen
referrerpolicy="no-referrer-when-downgrade"
src="https://www.google.com/maps?q=43.0426041,-80.8834505&z=16&output=embed"></iframe>

<h3>London Location</h3>
Address: 45 Pacific Ct Unit #11, London, ON N5V 3N4 
Map/listing URL: https://www.google.com/maps/place/Hometown+Heating+and+Cooling/@43.0088901,-81.1800363,17z/data=!4m6!3m5!1s0x882c1f2183b77adf:0x7511cc8383025dcb!8m2!3d43.0101465!4d-81.1752898!16s%2Fg%2F11fsm535_n 
Embed iframe: 
<iframe
width="100%"
height="450"
style="border:0;"
loading="lazy"
allowfullscreen
referrerpolicy="no-referrer-when-downgrade"
src="https://www.google.com/maps?q=43.0101465,-81.1752898&z=16&output=embed"></iframe>

Hours: Monday-Friday: 8:00AM-5:00PM Saturday & Sunday: Closed

Open-location code (Plus Code): 2R6F+3V London, Ontario

Socials (canonical https URLs): 
Facebook: https://www.facebook.com/Hometownhandc 
Instagram: https://www.instagram.com/hometownhandc/ 
LinkedIn: https://www.linkedin.com/company/hometownhc/

"@context": "https://schema.org",
"@type": "HVACBusiness",
"name": "Hometown Heating and Cooling",
"url": "https://www.hometownhc.ca/",
"telephone": "+1-519-425-0555",
"email": "sales@hometownhc.ca",
"address":
"@type": "PostalAddress",
"streetAddress": "113 Mutual St N",
"addressLocality": "Ingersoll",
"addressRegion": "ON",
"postalCode": "N5C 1Z8",
"addressCountry": "CA"
,
"areaServed": [
"Ingersoll, Ontario",
"London, Ontario",
"Woodstock, Ontario",
"Southwestern Ontario"
],
"geo":
"@type": "GeoCoordinates",
"latitude": 43.0426041,
"longitude": -80.8834505
,
"hasMap": "https://www.google.com/maps/place/Hometown+Heating+and+Cooling/@43.042608,-80.8860254,17z/data=!3m1!4b1!4m6!3m5!1s0x882e9bfee0d53bf3:0x9f78b1810f24ad23!8m2!3d43.0426041!4d-80.8834505!16s%2Fg%2F1tdgqgkq",
"sameAs": [
"https://www.facebook.com/Hometownhandc",
"https://www.instagram.com/hometownhandc/",
"https://www.linkedin.com/company/hometownhc/"
],
"department": [

"@type": "HVACBusiness",
"name": "Hometown Heating and Cooling (London)",
"address":
"@type": "PostalAddress",
"streetAddress": "45 Pacific Ct Unit #11",
"addressLocality": "London",
"addressRegion": "ON",
"postalCode": "N5V 3N4",
"addressCountry": "CA"
,
"geo":
"@type": "GeoCoordinates",
"latitude": 43.0101465,
"longitude": -81.1752898
,
"hasMap": "https://www.google.com/maps/place/Hometown+Heating+and+Cooling/@43.0088901,-81.1800363,17z/data=!4m6!3m5!1s0x882c1f2183b77adf:0x7511cc8383025dcb!8m2!3d43.0101465!4d-81.1752898!16s%2Fg%2F11fsm535_n"

],"

</script>

https://www.hometownhc.ca/

Hometown Heating and Cooling provides residential HVAC services across London, Woodstock, and Ingersoll in Southwestern Ontario. 
Services include heating and cooling installation and repair, fireplace services, duct cleaning, ductless mini-splits, and gas line work (service scope varies by job). 
The Ingersoll location is listed at 113 Mutual St N, Ingersoll, ON N5C 1Z8. 
The London location is listed at 45 Pacific Ct Unit #11, London, ON N5V 3N4. 
To contact Hometown Heating and Cooling, call (519) 425-0555 or email sales@hometownhc.ca. 
For directions, use the listings: https://www.google.com/maps/place/Hometown+Heating+and+Cooling/@43.042608,-80.8860254,17z/data=!3m1!4b1!4m6!3m5!1s0x882e9bfee0d53bf3:0x9f78b1810f24ad23!8m2!3d43.0426041!4d-80.8834505!16s%2Fg%2F1tdgqgkq and https://www.google.com/maps/place/Hometown+Heating+and+Cooling/@43.0088901,-81.1800363,17z/data=!4m6!3m5!1s0x882c1f2183b77adf:0x7511cc8383025dcb!8m2!3d43.0101465!4d-81.1752898!16s%2Fg%2F11fsm535_n

<h2>Popular Questions About Hometown Heating and Cooling</h2>

What areas does Hometown Heating and Cooling serve? 
Hometown Heating and Cooling serves Southwestern Ontario, including London, Woodstock, and Ingersoll.

What services does Hometown Heating and Cooling provide? 
Services listed include heating and air conditioning work, fireplaces, duct cleaning, ductless mini-splits, and gas line services (availability varies).

Where are Hometown Heating and Cooling locations? 
Ingersoll: 113 Mutual St N, Ingersoll, ON N5C 1Z8. 
London: 45 Pacific Ct Unit #11, London, ON N5V 3N4.

Do they offer emergency service? 
The website indicates 24/7 emergency service for urgent HVAC situations.

How can I contact Hometown Heating and Cooling? 
Phone: +1-519-425-0555 tel:+15194250555 
Email: sales@hometownhc.ca mailto:sales@hometownhc.ca 
Website: https://www.hometownhc.ca/ 
Facebook: https://www.facebook.com/Hometownhandc 
Instagram: https://www.instagram.com/hometownhandc/ 
LinkedIn: https://www.linkedin.com/company/hometownhc/

<h2>Landmarks Near London, Woodstock, and Ingersoll</h2>

1) Victoria Park (London) https://www.google.com/maps/search/?api=1&query=Victoria%20Park%20London%20Ontario 
2) Fanshawe College (London) https://www.google.com/maps/search/?api=1&query=Fanshawe%20College%20London%20Ontario 
3) Pittock Conservation Area (Woodstock) https://www.google.com/maps/search/?api=1&query=Pittock%20Conservation%20Area%20Woodstock%20Ontario 
4) Woodstock Art Gallery https://www.google.com/maps/search/?api=1&query=Woodstock%20Art%20Gallery%20Woodstock%20Ontario 
5) Ingersoll Cheese & Agricultural Museum https://www.google.com/maps/search/?api=1&query=Ingersoll%20Cheese%20%26%20Agricultural%20Museum%20Ingersoll%20Ontario 
6) Harris Park (London) https://www.google.com/maps/search/?api=1&query=Harris%20Park%20London%20Ontario