Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob has stopped working for a while, it could be due to a dead coin battery, water damage, receiver module issues or a defective electronic chip. These are all simple fixes that can get your car back up to speed in no time!
Car keys can also get damaged due to the blade getting worn. You can easily fix this issue by visiting your local Car Key Man Auto Locksmith to install a new blade.
Battery
The key fob battery in your Peugeot 308 can sometimes die or become insufficient to send an effective signal to the car. This can cause the key fob to stop working and prevent you from opening and locking the doors, or even starting your engine. To fix this issue, you'll have to replace the battery on your key fob.
You'll need batteries for replacement from an auto parts store or at your local hardware store. When you purchase the battery make sure that it's brand fresh and hasn't just been sitting on the shelf for a long time. A fresh new battery will have more capacity and will be able to send a more powerful signal to the car.
After replacing the battery, try unlocking the doors and locking them using the key fob. If the doors won't unlock, it's likely that the receiver module in the car is the culprit. https://www.g28carkeys.co.uk/peugeot-car-key-replacements-near-me/ can reprogramme the receiver module.
It's possible that the key fob's internal chip has been damaged. It's possible to cause damage to your key fob when you drop it on the ground or expose it to moisture. The rubber seals that shield the chip from moisture may become worn down over time especially if your key fob is exposed to water for lengthy period of time, like when you submerge it in the ocean at the beach. To prevent this from happening, you must keep your key fob away from moisture and not let it come into contact with water.
Water Damage
If your key fob becomes wet and soaked, whether you tossed it into the pool or threw it into the puddle, don't believe it's a case of lost cause. While the key fob has rubber seals to protect it from water, long-term exposure to water may cause damage to the electronic chip. Because water is a good conductor so any water that makes it inside the key fob will cause a series of short circuits that eventually damage the chip. After removing the batteries, clean the contacts using isopropyl, and then dry them completely before putting them back into.
Your Peugeot 308 may not start due to a dead battery. Jumper cables can be a great method of restarting the engine if you own an extra car. If the battery has a problem and needs to be replaced, it should be replaced.
A poor receiver in the car may also block it from receiving the signal from the key fob. It could be a issue with the antenna, or wiring or the key fob could be damaged. If you're using a new key fob, it could need to be programmed to the vehicle. If you are unable to solve the issue, you should contact a professional technician. A skilled technician will be able identify the issue quickly and fix it immediately.
Radio Interference
The signs of a key fob not being recognized or having a narrow range typically indicate that there is an interference in the system. This is either radiated or conducted, with the former resultant from power supply cables or the speaker wiring being too close to electrical components. Generally speaking, rerouting cables or moving them further away from the components can resolve the issue.
It's unlikely that someone is listening in on your key fob's signals to steal your car, but it's possible that the signal has been muffled by radio frequency interference. This is a simple problem to solve.
If your key fob isn't being recognized by the system, you can try a new battery. Also, make sure that the battery is the correct size and type. Batteries that are not of the correct dimensions can harm your battery.
These devices could interfere with the key signal if they use the same radio frequency. It is best to avoid attaching these devices to your key fob.
Pairing Issues
A car's remote keyless entry system includes a receiver that receives radio frequency signals from the key fob. It will not be possible to start your car if this receiver is not functioning properly, even if your key fob is in good working order and can be reprogrammed. The issue could be caused by a number of reasons, such as the battery of a coin that is dead and water damage. The receiver may also be malfunctioning because of a software bug or internal damage to the key.
One of the most frequent reasons that your Peugeot 308 key fob is not working is that the battery inside has died. The battery can be replaced, but ensure that it's the proper battery for your key fob. It is recommended to use a battery that is the same size as well as voltage and specifications as the original.
Your Peugeot 308 keyfob may not work if it is connected to an unrelated vehicle. This can happen if you have given your key fob away to a friend or in the event that the key was used to unlock or start other vehicles. You can fix this by reprogramming your key fob with an OBDII scanner. The tool will ask you for details about your car, such as its VIN or engine type. It is essential that you enter the correct information.