What You Should Know About Your Peugeot Key Fob
Peugeot Key Fob is an excellent feature that allows drivers to start their vehicle from an extended distance. This feature is helpful in hot or cold conditions, since it gives motorists to warm up their engine and interior before entering the vehicle.
Car dealerships can cut and program new Peugeot keys for you however, only if you are willing to wait for weeks to complete the process. We can cut and program, then deliver new Peugeot keys faster with KeyNOW.
Keyless Entry
Along with unlocking and opening your car doors, a few key fobs can also be used to start the engine. This is useful when the vehicle needs to be left in a hot weather condition or in the case that the boot is full of heavy objects that make it difficult to open the door. To open the car using your key fob, press the unlock button on it a few times in quick intervals. The door locks should unlock and the red LED light will start to flash. If not it means that the battery inside the key fob could be dead and need replacing. Alternatively, RF interference from nearby buildings may affect your system.
Certain key fobs also come with a physical key that can be used to open your vehicle (often for the driver's side door, but occasionally the boot as well). You can open them by lifting a flap or pressing the button. The key's physical form can slide out of a slot in the case, allowing access to the lock.
Water can damage key fobs, especially when the chips are exposed to salty or soapy water. In some instances a chip that has been damaged could cause key fobs to stop working. In this situation, the key fob must be replaced by the dealer. However, https://www.g28carkeys.co.uk/peugeot-car-key-replacements-near-me/ are able to provide replacement keys quicker than dealers and at a significantly lower cost.
Remote Start
If your key fob has the remote start feature it will allow you to start the engine without needing to hold the keys to your car in hand. This is particularly useful when it's hot and you want to cool your car while running the errands. There are some things you must know prior to using this feature.
Some key fobs come with an engine start button that you can press to start your vehicle remotely (for example, Ford has a circular an arrow which is moving clockwise around its key fob). Others, like Mazda's requires that you first lock the key and then press the start button.
If you're having trouble starting your car, it could be that you have a dead or weak battery in the key fob. This is due to the fact that the batteries inside the key fob aren't strong enough to send an effective signal to the car's system.
If this happens, either replace the batteries or reprogram your key fob. The procedure is different for every car, but the instructions are usually found in the owner's manual. Our mobile technicians are also capable of helping you with this process. We have the expert equipment to cut and program a replacement Peugeot keys at your office, home or when you're stuck by the roadside.
Door Locks
The Peugeot 3008 remote key system enables the owner to lock and unlock their vehicle by pressing of a button on the key fob. This key fob, unlike the standard key that has an opening in the middle, is designed to store an encrypted copy of the car keys inside.
For this, it employs an exclusive radio signal that is only transmitted when the key is within a certain range of the vehicle. Once the signal is detected and a solenoid in the door lock transforms the electronic command into an action that is mechanical. This causes a rod to control the car door locks just as keys on a real key would.
There are several possible causes for an Peugeot keyfob not locking or unlocking your vehicle. The most common is the battery of the coin is dead, which is easily replaced in a matter of minutes. Other reasons include worn-out buttons, signal interference or water damage or a malfunctioning chip.
Modern cars require a very high level of precision to function and the key fob isn't immune to this. The key fob may be programmed incorrectly or it may have a hardware defect that stops the vehicle from responding to the signal generated by the key. A locksmith who is certified can reprogram the key fob, and ensure that it works with your vehicle.
Immobiliser
Peugeot was among the first companies to include an immobiliser in a key. This prevents the car from starting in the event that the key sends the wrong signal to the vehicle. If it's new, this is great however as they age, the chips wear out and cause problems. This usually starts with getting a message saying 'anti theft system active on the dashboard or a warning light is blinking indicating "immobiliser fault".
Usually Peugeot dealerships have to be called to create and programme replacement keys. However, a professional mobile locksmith comes with dealer-standard equipment inside their van, meaning they are able to be with you and making new Peugeot keys at the roadside or at home, much faster than dealerships would be capable of.
Peugeot keys usually start to malfunction when the key blade begins to wear. This wear can cause the mouth of the key to get into the lock correctly, which can cause further wear on the locks. The problem can be resolved by changing the blade. It may also be helpful to have the teeth on the key cleaned to allow them to perform more smoothly. This is something only a trained auto locksmith can accomplish however it can save you lots of headache and expense in the long term.