Peugeot 308 Key Fob Replacement

Peugeot's 308 may be somewhat old-fashioned, but it is still eye-catching. It's not the most luxurious car in its class, but it's a relaxing and civilised driving experience.

Here at Coded Car Keys we are often asked to replace peugeot 308 key fobs. The following tips can aid whether the issue is ongoing or intermittent.

Water Damage

If you accidentally drop your key fob in an eddy, or it is wet while kayaking, canoeing or rafting or canyoning the fob is more likely to be damaged by water. The best way to avoid this from happening is to always keep it in a dry bag when you're outdoors or performing things where the fob might be exposed to high levels of water.

You'll also need to ensure that the fob is completely dry prior to opening it and using it again. If you detect any odors emanating from the fob (such as industrial fluid or windshield washer fluid) it is a sign that it has been submerged.

A circuit that is wet can cause the battery's charge to be drained or even explode. If you're able fish the 308 key fob of the water body it was stuck in then flip the button side down and shake out as much water as you can before opening the case. Remove the battery, then wipe the circuit board down using a cotton swab which is dipped in 90 percent alcohol.

Other reasons why your Peugeot 308 remote keyless entry system may stop working include a dead coin battery, receiver module issues signal interference, an electronic chip that is damaged. If none of the above are the issue, try resetting the system by disconnecting the battery at 12 volts for approximately 15 minutes.

Dead Coin Battery

Peugeot cars come with a remote start system that allows the driver to start the car from afar, warming up or cooling down the vehicle prior to entering. This feature is very beneficial particularly in cold winter months. However, there are times when the remote start system stops working due to a variety of reasons, such as the battery of a coin that is dead.

The coin-shaped battery that is inside the key fob could last between two and four months, depending on how frequently it is used, where it was purchased, and the way it is used. The date for use-by is typically written on the package or marked in the manual.

If the key fob has stopped working after exposure to clean tap water and you want to remove the battery, clean the chip using a paper towel and isopropyl alcohol, and then dry it completely before replacing it. In case of exposure to soapy or salty water, the chip might be fried and you will require replacing the key fob entirely.

If you're not sure the battery is defective you can check its voltage with an instrument set to the car's voltage range. Connect it to the minus and plus terminals. If the voltage is less than 12-13 volts then it is time to replace the battery. If you want to, you can attempt to reset the onboard computer by disconnecting the battery at 12 volts for a short period of time, and reconnecting it in reverse order (positive cable first followed by negative). The engine should then start.

Faulty Receiver Module

If you don't see the "Key Detected" message, it could mean the receiver module not working properly. It's the part which sends out a signal when your key fob is activated. It also acts as an alarm and prevents the vehicle from starting without the correct key.

This could be due to a variety of causes, such as water damage or simply aging. If the chip inside your Peugeot 308 keyfob has been damaged due to dirty tap water it could be due to the fact that the keyfob was exposed to it. In this scenario you'll need to remove it apart and clean it thoroughly with isopropyl alcohol or an electronic cleaner. Once it's dry you can put the battery back in and test it again.

If the issue continues to persist you're probably in need of a idea to visit a local Peugeot specialist or locksmith. They can utilize a diagnostic tool in order to identify the issue and then fix it.

It can be stressful to lose your Peugeot car key. A professional auto locksmith can solve the issue in a matter of minutes. They can cut a new key and then program it into your vehicle, making sure you can get back out on the road as fast as you can. Find locksmiths near you.

Faulty electronic chip

The electronic chip inside the Peugeot 308 key fob is a very important component of the remote control system. If it gets damaged, your car might not start or you might get a message saying "anti-theft active". If https://www.g28carkeys.co.uk/peugeot-car-key-replacements-near-me/ occurs, the only solution to fix the problem is to replace the key. Professional auto locksmiths are able to offer the service within the shortest possible time.

The chip inside your Peugeot 308's key fob may fail due to many reasons, including water damage, sweat or dirt. If your Peugeot key fob was exposed to soapy or dirty water, it should be cleaned immediately. You can use a paper towel and isopropyl alcohol to clean the electronic component. Then, you need to allow the battery to completely dry.

Sometimes the key fob may be inoperable due to radio interference. This can be caused by other devices that operate at the same frequency as your Peugeot key fob. It could be caused by unsafe conditions or objects that are near to the vehicle. It is recommended that you visit a Peugeot dealer if you experience this issue.

The Peugeot Key Fob 207/308 is delicate and needs special attention. It is imperative not to drop or throw the key fob. If you lose it, try to locate it as quickly as is possible. You can reset the on-board computer by disconnection of the battery for a few minutes. Make sure you disconnect the negative cable first, then the positive.