Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot 308 key fob has stopped working for a while, it could be due to a dead battery in the coin or water damage the receiver module or a faulty electronic chip. These are all easy fixes that can get your car back to speed in a matter of minutes!

The key blade may become worn out and cause an issue with your car key. You can fix this problem by visiting your local Car Key Man Auto Locksmith to have a new blade fitted.

Battery

The key fob on your Peugeot 308 may die or become weak enough to not send a clear signal. This could cause the key fob's function to cease which prevents you from locking or opening the doors or starting your engine. You'll need a new battery on your key fob to correct this.

You can purchase a new battery at an auto parts store or at your local hardware store. Make sure the battery is brand new and has not sitting on the shelf for too long. A brand new battery is more capacity and can send a stronger signal your vehicle.

After replacing the battery try unlocking the doors and locking them with the key fob. If the doors aren't unlocking it's likely that the issue lies with the car's receiver module, which can be reprogrammed by your local Peugeot dealer.

It's also possible that the chip inside your key fob is damaged. You could harm your key fob if you drop it on the ground, or expose it to water. The rubber seals that protect the chip from moisture might wear down over time, particularly if the key fob is exposed to water for lengthy periods of time, such as submerging it in the ocean at the beach. To avoid this from happening, you must keep your key fob safe from moisture and never let it come in contact with water.

Water Damage

Don't let go of your key fob if it gets wet, no matter if you slipped into an aquisition or stumbled into a pool. The key fob is protected by rubber seals, but prolonged exposure to water can damage its electronic chip. Water is a great conductor, and any water that comes into the key fob will trigger short circuits in series which eventually damage the electronic chip. After taking the battery out, scrub its contacts with isopropyl ethanol and dry it off completely before putting it back into.

Your Peugeot 308 may not start because of a dead battery. If you have a spare car, jumper cables could be used to get the engine going again. If the battery is faulty the battery must be replaced.

Another possible cause is a defective receiver inside the vehicle that could hinder it from receiving a signal from the key fob. It could be a issue with the antenna or wiring, or the key fob may be damaged. If you are using a new key fob, it might need to be programmed for the vehicle. If you're unable to fix the problem yourself seek out a professional technician. A trained technician will be able determine the issue quickly and correct it swiftly.

Radio Interference

The signs of a key fob not being recognized or with a limited range of operation usually mean there is a problem in the system. The interference could be transmitted or radiated the latter being caused by power cables and speaker cables being too close to electrical components. In https://www.g28carkeys.co.uk/peugeot-car-key-replacements-near-me/ , rerouting cables and moving them away from these components will solve the issue.

It's unlikely that anyone is listening in on your key fob's signals to take your car away, but it's possible that the signal is being distorted by radio frequency interference. This is a simple issue to resolve.

If you're having issues with your keys that are not recognized, try a new battery. Also, make sure that the battery is the right type and size. Incorrectly sized batteries could harm the fob.

Some alarm systems that are sold on the market and radar detectors use the same radio frequency as your key fob and could cause them to interfere with your key signals. It is advised to avoid using these devices with your key fob.

Pairing Issues

A car's remote keyless entry system includes an antenna that receives radio frequency signals from the key fob. You will not be able start your vehicle if the receiver is not functioning properly, even if your key fob is in good working order and is reprogrammable. The issue can be caused by a range of things, including a dead coin battery and water damage. The receiver could also be failing due to a software error or internal damage in the key.

One of the main reasons that your Peugeot 308 key fob isn't working is because the battery inside has gone out of service. This battery can be replaced, but you need to be sure it's the proper battery for your key fob. Using an incorrect battery could cause further issues with the key fob, so it's best to use the original battery or an equivalent replacement in size, voltage and specifications.

Another reason that the reason your Peugeot 308 key fob might not work is because it is linked to a different car. It is possible that you have accidentally given the key fob to a friend or it was used to unlock other vehicles. You can resolve this by reprogramming your key fob with an OBDII scanner. The tool will ask you for details about your car like its VIN or engine type. It is essential to enter the correct information.