Automotive Key Repair - What to Do When Your Car Key Won't Turn in the Ignition

We've all experienced this when the car's key doesn't engage in the ignition. It occurs at the most inconvenient times, like when you're filling your car with groceries or when you're returning to home from work.

There are many different solutions that will help you get back on your way. Here are a few of the most common automotive key repair issues and their possible solutions:

Broken or bent keys

The most frequent reason the owner of a car is unable to start their vehicle is a bent key. Straightening the key is an easy fix. This may seem simple however, you need to be careful. The key is thin and can break if bent even a little.

To accomplish this, you'll require a stable workspace, and an plier. Take the key at one end with the pliers, and bend it until it is straight. This can be done on a flat surface, or in a vise. You can then put it in the lock to see if it turns.

If not, you could need to have a new one made. You will not need to call a locksmith and your existing key will function.

https://www.g28carkeys.co.uk/car-key-repairs-near-me/ 's a good idea to keep a spare key in your pocket so that you don't end up without a way into your vehicle in the event of a damaged key.

If you're having issues with a broken or bent key, try applying some grease on it prior to inserting it into the lock. This will help it to move easier through the cylinder and stop it from getting stuck. You can apply graphite or spray lubricant. If you're using a spray ensure you attach the plastic tubing included with it for more precise application. This will also help prevent moisture from ruining your key.

Stuck pins and springs

A pin (also called a roll pin, or a spring) can become stuck. A pin is a small piece of metal that measures between 5.1 and 7.6 cm (2.5-3.0 in) long with hollow ends. It is used to connect two components of machines. In the majority of instances, it is possible to remove pins by pulling it out using your fingers or a wrench.

If you own an older vehicle that has microchip keys, it is possible that the key needs to be programmed in order to work with your car. This process can vary depending on the manufacturer and car.

Contact us for assistance with your vehicle keys or locks! We can repair, replace, or program almost any vehicle key.

Gear Selector

If your car's gear selection gets stuck in park mode, it's important to take it to an expert mechanic immediately. This is a safety issue and you could cause serious vehicle damage if you continue driving. It could also be a sign that your transmission is experiencing more serious problems, which are costly to fix.

Most of the time this issue is easily fixable. The most frequent reason the gear selector can be stuck is because one of the cable ends has snapped, or separated from the lever itself. The mechanic can repair this issue in a matter of minutes.

In certain instances, the bushings on the gear selector may be damaged or worn. Rubber covers are placed around the articulation points of the gear system in order to make it more fluid. They function in a similar way to cartilage in your knees, therefore it is important to ensure that they remain in good shape and soft.

You can extend their life by doing a few easy things. You should first avoid using the gear selection in extremely cold weather. This is because the cables that control the gear tend to freeze and cracking. You should also replace your bushings, like the ones manufactured by First Line, with high-quality ones.

These bushings are a critical component of your gear selector and should not be ignored. If you find that yours is damaged you must visit an auto repair shop that is specialized in Land Rover repairs. They will help you find the perfect parts to repair your gear selector device. They also offer a variety of other services like transmission maintenance and service.

Dead battery

If you turn your key in the ignition and you hear nothing except a click, your battery is dead. The average battery lasts between three and five years, and as they age, they go through an natural process that causes them to end up dying prematurely. The negative plates of your car battery will start to be covered with sulfate crystalline deposits.

A dead battery could cause your car to lose power, which could lead to the radio or electric window malfunctioning. If your car is having problems getting started in cold weather, this is a good sign that it is time for an upgrade to your battery.

It's possible that your issue is not due to a dead battery but a malfunction in the charging system. Having your mechanic check to ensure that the serpentine belt, alternator and battery cables are all working correctly can resolve this issue.

Key fobs that are not working properly is another common issue with automotive keys. The key fob is a small device that connects to your computer in the vehicle and relays commands and signals between the engine and the accessory systems. This system may be confused or stop communicating if it becomes wet or exposed to extreme temperatures.

Follow the directions in your owner's guide to reset the keyfob that was lost. Based on the model, this will involve opening and closing the doors, turning off lights and other electronic devices on and off or pressing a certain sequence of buttons. If this doesn't work for your fob, it might need to be professionally programmed by a special technician. However, it's still worthwhile to try these easy steps before you decide to pay for a new device.

Ignition socket

Modern car keys have a transponder chip built into them that sends a signal to a receiver inside the ignition when inserted. This signal tells an immobilizer that the key is right for the car to begin. In the 1990s, car theft became an issue. Many manufacturers put in this transponder system to ensure security and insurance reasons.

If you have a newer vehicle, the only way to replace your key may be at the dealership or by contacting the manufacturer directly. Note down the VIN (vehicle ID number) of your vehicle before you leave. It is located on the dashboard's front, door jamb, or in your owner's manual.

Bring your current key with you to an AutoZone store, and an associate will employ an instrument to trace the contours of your key blank to accurately replicate the original key. The new key will be cut on the spot using a precision cutting machine. If your key is blade style, a key fob, or has a large black or grey head, it will have to be programmed to your specific car before it can be used to start the engine.