https://articlescad.com/15-trends-that-are-coming-up-about-ghost-immobiliser-installer-158610.html , more vehicles are stolen using the keys of the owner. Cloning equipment and door lock pick sets are readily available on the internet that allow thieves to clone your key remote and start your car in as little as 20-30 minutes.
Our Autowatch Ghost Immobiliser prevents these methods by preventing the ignition of your engine until a unique, personalised PIN code is entered. It is silent and discreet and doesn't use LED indicators which makes it inaccessible to criminal.
Distinction & Silence
Everyday more vehicles are taken without keys of the owner, with key cloning tools readily available to thieves online. Our Autowatch Ghost immobiliser can prevent this theft by stopping the vehicle from running until you enter your unique personal code, which you enter via existing buttons on your car dashboard or the steering wheel.
Once the Ghost is activated after entering your personal pin code, it will shut down all electronic components of the vehicle and stop the engine from running. It is designed to be discrete and quiet, meaning that it will not activate any alarm sensors inside the vehicle and that no LED indicators are displayed. This makes it virtually impossible to detect scanning devices for vehicle theft. Our installation engineers are TASSA-registered, DBS security-checked, and system-trained technicians. They will install the Ghost in a secret manner, leaving no trace that it was ever installed.
Our Ghost 2 device can also be used as a tracker. It transmits GPS signals to your phone which allows you to monitor the vehicle's movements and locate it on the map. You can track your car while it is being repaired or serviced in the garage.
The application can be turned off and on by simply turning it off or enabling it in the app on your phone and ensuring you have complete control of your car's security. The Autowatch Ghost application can be used to activate the "Service Mode" for your vehicle, which will allow you drive away without entering the button disarming sequence or needing to be inside the vehicle. This is especially useful for those who need to drop their vehicle off at the local garage to receive repair or service.
https://writeablog.net/tuliplawyer26/14-smart-ways-to-spend-your-the-remaining-ghost-immobiliser-installation-near makes it simple to secure your Ghost-II by simply using your mobile phone. When you are within the range of the vehicle, your Ghost-II is disarmed automatically. You can even enable this feature with your phone in sleep mode, which you can carry in your pocket!
Easy to Operate
The Autowatch Ghost immobiliser is silent and blocks thieves from hacking or cloning your key fob. The device plugs directly into the vehicle's CAN Data Network. It only allows the vehicle to start when the PIN code has been entered using the original buttons on your vehicle. The user can do this in a concealed location or via the smartphone app. This is why Autowatch Ghost is so discreet, TTW install it under the dash or steering wheel in a place that you aren't aware it's there. It's also weatherproof and so small that it's virtually undetectable by car criminals looking for circuit cuts or the distinctive clicking sound of an immobiliser relay that is a standard.
The availability of cheap cloning tools and door lock pick sets allow thieves to take almost any vehicle today without the owner's key. The Autowatch Ghost immobiliser prevents this from happening and can also be transferred to a new vehicle if you switch cars throughout the life of your warranty, provided that the vehicle is compatible with Autowatch Ghost.
The device is set up by a certified technician in an unidentified location, and then hidden so that it is invisible to thieves even when the engine is running. The Ghost also doesn't send out any radio frequency signals so it is impossible for thieves to locate the device by using RF scanning and code-grabbing technologies.
The Ghost can also be set to Service/Valet Mode, so that you don't have to be concerned about the technician getting the pin code of your car is taken to the garage for service. The Ghost can do this since it utilizes the buttons that were originally on your vehicle, so there is no wiring required.
The Autowatch Ghost is also a TASSA Verified Product which means that a number of insurance companies have accepted it as an additional security measure. It is recommended to talk to your insurance company prior to installing the Ghost immobiliser installed. You will save money on your insurance and also protect your vehicle from costly theft claims.
No Radio Frequency Signals
Autowatch Ghost is a system that prevents vehicle theft by preventing key replicating. If your car is located in garage, bodyshop or dealership and someone on the inside copies your original key fob it is possible that the Ghost immobiliser is still cutting out the engine since only you are able to enter the personalised pin code to start the vehicle. Our TASSA certified installers will teach you how to change this pin code according to the requirements, in case the device is compromised.
The Ghost doesn't transmit radio frequency signals as other systems do, such as trackers. This means that thieves can't detect it with RF scanners or code grabbers. This feature along with the quiet and discreet operation makes this a quiet but effective solution.
A simple smart-phone application is available for the iPhone to pair with the Ghost-II. If you are ready to drive, simply enable the application and it will disable the Ghost-II when you approach it. It is safe to drive your vehicle, since your phone will automatically re-arm once you are away.
It's a simple and effective method to ensure that you're safe while driving your car. The app can be downloaded for free from the iPhone App Store.
Unlike the original Autowatch Ghost system the Ghost-II does not have LED indicators and therefore is totally undetectable by thieves since they are unable to see it unless they are close enough to the vehicle's window and switch on the light.
The Autowatch Ghost-II also features a power cut disconnect function which shuts down your vehicles engine and supply power to the ignition when the system is activated. This is a great safety feature that will prevent theft of your vehicle while you're on long journeys or if you've forgotten the keys in the ignition. This is a great feature for families & business people who need to park their cars in public areas, or who use their car to work while traveling.
No LED Indicators
The Ghost is connected to the vehicle's CAN Data system and a personalised PIN code is inputted via chosen options on the dash board or on the steering wheel and allows the device to be activated. It doesn't use LED indicators, making it undetectable using scanners for vehicle theft and silent to operate. It is transferable to another vehicle, as long as the new vehicle is compatible and technology has not changed since the time it was first installed. Holbon UK Ltd install and hand over the Ghost immobiliser with the owner's guide and a certificate of authenticity.