https://www.g28carkeys.co.uk/peugeot-car-key-replacements-near-me/ and How to Fix Them
If your Peugeot key fob suddenly stopped functioning it could be because of an inoperative battery for the coin-cell, water damage, receiver modules issues, or a defective chip. Luckily, all of these are easy to fix and you'll be able to get your vehicle back to normal in no time at all!
The blade of the key can get worn-out and cause a faulty car key. This is an easy fix to fix the problem if you go to your local Car Key Man Auto Locksmith and let them fit an entirely new key blade for you.
Battery
The battery for the key fob in your Peugeot 308 can sometimes die or become weak enough to send an intense signal to your car. The key fob can cease to function and stop you from locking or unlocking your doors or even starting the engine. You'll require a new battery for your key fob to fix this.
You can buy a brand new battery at an auto parts store, or at your local hardware store. When you purchase the battery, ensure that it's fresh and hasn't just been sitting on the shelf for a long time. A fresh new battery will have greater capacity and will be able to transmit a stronger signal to the car.
After replacing the battery try unlocking the doors and locking them using the key fob. If the doors do not unlock it's possible that the receiver module inside the car is at fault. Your local Peugeot dealer can reprogram the receiver module.
The chip inside the key fob could also be damaged. This could happen if drop your key fob on the ground or expose it to water. The rubber seals that protect the chip from moisture may become worn down over time particularly if the key fob is exposed to water for extended periods of time, such as submerging it in the ocean at the beach. To avoid this happening, you must protect your key fob from moisture and to never let it come in contact with water.
Water Damage
If your key fob becomes submerged and soaked, whether you dropped it into the pool or fumbled it into the puddle, don't believe it's a loss. The key fob is protected by rubber seals, but prolonged exposure to water may affect the electronic chip. Because water is a good conductor so any water that is able to get inside the key fob may cause a chain of short circuits which will eventually destroy the chip. After taking the batteries out, clean its contacts with isopropyl and dry them completely before putting them back in.
Your Peugeot 308 may not start due to a dead battery. Jumper cables can be a great option to restart the engine if you have an extra car. If the battery has a problem, it must be replaced.
A malfunctioning receiver in the car may also block it from receiving the signal from the key fob. It could be a issue with the antenna or wiring, or the key fob could be damaged. It may be necessary to program a new keyfob for your vehicle if using one. If you're unable to solve the issue, contact an expert technician. A professional who has been trained in the field will be able determine the issue quickly and fix it immediately.
Radio Interference
Symptoms such as key fobs that are not recognized or having a limited range typically indicate that there is a problem with the system. The interference could be radiated or transmitted, the latter caused by power and speaker cables that are too close to electrical components. Usually, rerouting the cables or moving them away from the components can resolve the issue.
It's unlikely someone is watching your key fob's signals in order to steal your vehicle It's possible, however, that radio interference has ruined the signal. This is an easy issue to solve.
If your key fob is not being recognized by the system, you can try a new battery. Also, ensure that the battery is the correct size and type. Batteries that are not the right dimensions can harm your battery.
These devices could interfere with the key signal if they are using the same radio frequency. It is recommended to avoid using these devices on your key fob.
Pairing Issues
The remote keyless entry system that is used in automobiles has a receiver which receives radio signals from the key fob. If this receiver has developed issues, you will not be able to start your car even if your key fob functions and is reprogrammed. The issue could be caused by a variety of factors, including the battery of a coin that is dead and water damage. The receiver could also be malfunctioning as a result of an error in the software or internal damage to the key itself.
The battery inside your Peugeot 308 keyfob has probably been drained. The battery can be replaced, but you must be sure it's the proper battery for your key fob. It is recommended to use batteries that are the same size as well as voltage and specifications as the original.
Another reason that your Peugeot 308 key fob might not work is because it is paired with another vehicle. You may have accidentally given your key fob away to someone else or it was used to unlock other vehicles. This can be solved by reprogramming the key fob using an OBDII scan. The tool will ask you for information about your vehicle, such as its VIN or engine type. It is vital to enter the correct details.