Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot 308 key fob has stopped working one day it could be due to a dead battery in the coin or water damage the receiver module or a faulty electronic chip. These are all easy fixes and you can restore your car to speed in no time!

The key blade can become worn out and cause an unusable car key. This can be fixed by visiting your local Car Key Man Auto Locksmith and let them install the new blade for you.

Battery

The battery of the key fob in your Peugeot 308 can sometimes die or become too weak to send an energizing signal to the car. The key fob could be inoperable and prevent you from locking or unlocking your doors or even starting the engine. To fix this, you'll have to replace the battery in the key fob.

You'll need to purchase a replacement battery from an auto parts store or your local hardware store. Make sure the battery is brand new and has not sitting on the shelf for too long. A new battery has greater capacity and can transmit a stronger signal to your vehicle.

After replacing the battery try unlocking the doors and locking them using the key fob. If the doors aren't unlocking it is most likely to be with the receiver module of your car which can be programmed by your local Peugeot dealer.

The chip inside the key fob might be damaged. https://www.g28carkeys.co.uk/peugeot-car-key-replacements-near-me/ could happen when you drop your key fob on the ground or expose it to water. The rubber seals that shield the chip from moisture might become worn down over time especially if your key ring is exposed to water for extended periods of time, such as submerging it in the ocean at the beach. To prevent this from happening, it's essential to keep your key fob away from moisture and not let it come into contact with water.

Water Damage

Don't let go of your key fob when it gets wet, regardless of whether you dropped it into an aquisition or stumbled into a puddle. The key fob is protected by rubber seals however, prolonged exposure to water can affect the electronic chip. Water is a great conductor and any water that is absorbed into the key fob could cause the short circuits to be in series, which will eventually ruin the electronic chip. After taking the battery out, clean its contacts with isopropyl alcohol, and dry it completely before putting it back in.

A dead battery might be the reason your Peugeot 308 won't start. Jumper cables can be a great method to start the engine in case you have an additional vehicle. If the battery has a problem, it must be replaced.

Another possibility is a malfunctioning receiver in the vehicle, which can block the signal from the key fob. It could be due to a problem with the antenna or wiring, or the key fob may be damaged. It might be necessary to programme a new key fob to your vehicle if you are using one. If you are unable to fix the problem yourself, contact a professional technician. A skilled technician will be able to diagnose the problem quickly and resolve it in a timely manner.

Radio Interference

Symptoms such as key fobs not being recognized or having a restricted range of operation usually mean there is a problem with the system. The interference could be transmitted or radiated the latter caused by power cables and speaker cables being too close to electrical parts. In general, rerouting cables or moving them away from these components will resolve the problem.

It's unlikely someone is watching your key fob signal in order to steal your vehicle It's possible, however, that radio interference has slowed the signal. This is an easy issue to resolve.

If your keys that are not recognized, try a fresh battery. Make sure that the battery is the right size and type. Batteries that are not the right dimensions can harm your battery.

Some aftermarket alarm systems and radar detectors operate on the same radio frequency as your key fob and can cause them to interfere with your key signals. Avoid attaching these devices to your key fob.

Pairing Issues

The remote keyless entry system has an antenna that receives radio frequency signals from the key fob. If this receiver has developed an issue, you will not be able to start your car, even if the key fob is functional and is modified. The issue could result from a variety of reasons, such as a dead coin battery and water damage. The receiver could also be faulty due to a software glitch or internal damage to the key.

One of the most frequent reasons for why your Peugeot 308 key fob isn't working is that the battery inside has gone out of service. You can easily replace this by using a fresh battery, but it is important to select the correct battery for your key fob. It is best to use one that is the same size with the same voltage, specifications, and specifications as the original.

Your Peugeot 308 keyfob may not function if it was connected to an unrelated vehicle. This could happen if you have given your key fob to someone else or in the event that the key was used to unlock and start other vehicles. This can be resolved by reprogramming the fob using an OBDII scanner. The tool will ask you for details about your car including its VIN or engine type. It is vital to enter the correct details.