Navigating Fire Code Compliance for Historic Buildings in Wooster Square

Navigating Fire Code Compliance for Historic Buildings in Wooster Square
Wooster Square’s historic brick townhouses, brownstones, and converted mills give New Haven its character, but those same features complicate fire code compliance and fire alarm installation. Thick plaster, balloon framing, ornate plaster ceilings, and mixed occupancies make detection, notification, and emergency egress a technical exercise that needs an integrator who speaks both life safety and historic preservation. Mammoth Security Inc. Designs and installs code-compliant fire alarm systems across New Haven and New Haven County with a practical plan that works inside real structures and passes review with the local fire marshal.

The team operates out of 857 Whalley Ave in Westville and serves properties from Wooster Square and East Rock to Downtown near the New Haven Green, Long Wharf, and up the I-95 and I-91 corridors. The focus is simple: a code-compliant fire alarm installation that meets NFPA standards, satisfies the Connecticut State Fire Safety Code, and respects the building’s historic fabric so an owner does not have to choose between safety and aesthetics.
Why this matters for Wooster Square and nearby districts
Historic buildings carry layered fire risks. Dry timber and concealed voids can move smoke fast. Small apartment units with shared corridors concentrate occupants. Mixed-use storefronts beneath apartments complicate notification and evacuation. In a place like Wooster Square, many buildings predate modern wiring, and many have been renovated several times. That creates blind spots if a fire alarm installation does not start with a full survey and a design that matches the building’s actual construction.

On top of that, New Haven enforces the Connecticut State Fire Safety Code through the local fire marshal’s office. A system that “works” is not enough. It must be documented, permitted, installed to meet NFPA standards, and tested on a set inspection cycle. A panel trouble or a failed acceptance test delays a certificate of occupancy for a new tenant or a renovation sign-off. That is why Mammoth Security treats fire alarm installation, inspection, monitoring, and coordination with the fire marshal as one integrated service, not disconnected tasks.
Code framework in plain language
NFPA 72 is the National Fire Alarm and Signaling Code. It is the industry standard that sets how a fire alarm system is designed, installed, inspected, tested, and maintained. NFPA 101, the Life Safety Code, addresses egress and occupancy. Connecticut’s adoption of these standards appears in the Connecticut State Fire Safety Code and the Connecticut State Fire Prevention Code as enforced by the Office of the State Fire Marshal and the New Haven Fire Marshal. For an owner or property manager, this means three practical checkpoints: design to NFPA standards, permit and coordinate inspections locally, and maintain the system on the required testing cycle.

For historic structures around Chapel Street, Greene Street, Court Street, and the Wooster Square Park area, a code-compliant design often blends modern addressable detection with notification that fits the architecture. An addressable device is a detector that has a unique digital address on the loop so the Fire Alarm Control Panel (FACP) knows exactly which detector activated. That speeds the fire department response because a display or printed report shows “Apartment 3F bedroom smoke” instead of “zone 2.”
Historic building realities that shape fire alarm installation
Renovating or repurposing a historic building rarely leaves a clear path for cabling or mounting. Mammoth Security designs fire alarm installation projects to meet code while fitting the site. That includes device choices, wiring methods, and notification layouts that keep inspectors satisfied and the building’s details intact.
Plaster and lathe walls and ornate ceilings: surface-mount raceways can be used when concealed wiring is not feasible, and low-profile horn strobe notification appliances avoid visual clutter while still meeting candela and audibility requirements. Concealed vertical chases and balloon framing: addressable loops with isolators minimize the impact of a wiring fault in older timber walls, and heat detectors are placed in interstitial spaces where smoke can bypass living areas. Mixed-use occupancies: a single FACP can separate tenant floors and ground-floor retail into distinct notification zones with a voice evacuation panel when occupant load calls for it, so instructions are clear and code-compliant. Steel and brick mill conversions: duct detectors in HVAC return air detect smoke moving through the system, while remote test stations are placed in accessible spots so maintenance teams do not disturb historic finishes during testing. Egress integration: where maglocks secure common doors, a fire alarm installation must release them on alarm. The system ties the lock power supply to the FACP’s notification circuit so doors unlock for safe exit. Detection, notification, and egress in simple terms
A complete system has three jobs. First, detection. That is smoke detectors, heat detectors, and sometimes flame detectors in special hazards. A smoke detector senses airborne particles. A heat detector triggers at a fixed temperature or at a rate-of-rise in fast-moving fires. A duct detector monitors air moving through ducts. Second, notification. That is horn strobe notification appliances in corridors, common rooms, and sometimes within apartments depending on occupancy and layout. A horn makes a sound to alert occupants, and a strobe flashes for those with hearing loss. In some occupancies, a voice evacuation panel uses speakers to deliver spoken instructions. Third, egress control. That is the link to electrified door hardware so exits remain safe. A magnetic lock, called a maglock, must release automatically on fire alarm and also when someone pushes a crash bar or a request-to-exit sensor, which is the motion detector above a door that signals a person is leaving so the door can unlock for egress.

In New Haven multi-family buildings, smoke detection in common corridors and basements pairs with heat detection in mechanical spaces. In mixed-use, the retail tenant space gets its own initiating devices, notification, and, where required, a separate communicator for the monitoring link. The design choices are specific to the building’s occupancy and layout, which is why a cookie-cutter fire alarm installation fails in Wooster Square more often than not.
Addressable versus conventional panels
Mammoth Security installs both conventional and addressable systems. A conventional fire panel reads input zones, which are groups of detectors wired together. It is economical for small buildings with simple layouts. An addressable fire panel reads each detector individually on a data loop. That gives exact location information on alarms and troubles. For historic structures with many similar rooms, such as subdivided brownstones on Olive Street, an addressable system helps the fire department get to the problem fast and makes annual testing more efficient because devices report their status digitally.

Potter, Kidde, Honeywell, and Simplex are the core fire alarm brands the team uses. Each supports addressable detection, horn strobes, voice evacuation, and flexible communications for 24/7 monitoring. Honeywell equipment also pairs smoothly with intrusion platforms from Honeywell and DMP, which matters for integrated security in mixed-use or larger properties. Selection depends on device availability, building needs, and coordination with other systems such as elevator recall, sprinkler flow and tamper switches, and HVAC shutdown.
The monitoring link and the end of copper phone lines
Many historic buildings still rely on old copper phone lines for the alarm communicator. Those lines are being retired across Connecticut. A modern communicator uses a dual-path cellular and IP unit supervised 24/7. Supervision means the central station checks the link at frequent intervals, so a failed path is detected before a real emergency. For properties near Union Station or the Downtown business core, where construction projects sometimes affect utility paths, dual-path monitoring is not optional. It is a requirement to keep the system compliant and reliable.

Mammoth Security provides 24/7 central station fire monitoring with immediate fire department notification. The central station receives the signal from the FACP through the communicator, called a central station receiver at the monitoring end, and notifies dispatch. For owners, this makes fire alarm installation more than a construction item. It is an operational service with live oversight every hour of the day.
Inspection and testing: what New Haven expects
NFPA 72 sets routine tests for detection devices, notification appliances, and control equipment. Many items are tested annually, with some checks performed more frequently. Batteries are load tested and replaced when they cannot support the system. Duct detectors are functionally tested. Horn strobes are sound- and light-checked at representative levels to verify audibility and visibility. The FACP, power supplies, and notification appliance circuits are tested for ground faults and opens. For buildings around the New Haven Green and on Chapel Street with business tenants on tight schedules, Mammoth Security coordinates testing to limit disruption while producing the documentation the fire marshal requires.

Property managers value a single vendor that designed the system and then inspects and services it. Documentation is complete, and devices are labeled and mapped to plans. That is the difference between an installation crew that finishes a project and an integrator that supports a building for its entire life cycle.
Integration with access control and security cameras
A fire alarm installation in a multi-tenant property often connects to access control and video. Doors must unlock on alarm. Elevators must recall to the correct floor. A business intercom that controls an entry door must drop out so responders can enter. The team installs access control with DMP, Avigilon Alta, Brivo, Salto, PDQ, and ICT platforms. Electric strikes, maglocks, and request-to-exit sensors are wired and supervised so a fault does not block egress. Door position switches confirm that exits open when commanded.

The same site may run security cameras on Avigilon, Axis, or Hanwha Vision with a Network Video Recorder (NVR) or a Video Management System (VMS). For large industrial or campus settings in New Haven and across Connecticut, ExacqVision and Milestone manage dozens to hundreds of cameras with HD and 4K resolution and H.265 smart codec compression to control storage. While video is not part of the fire alarm installation itself, tying access events and emergency responses to video helps owners review incidents and clean up after a false door prop or a nuisance trip.
Historic features and aesthetic impact
Owners of buildings along Greene Street, Court Street, and Wooster Place work hard to protect original details. That is why device placement, paintable raceway, and small-form devices matter. Where a device must sit in a visible plaster ceiling, low-profile detectors that meet the same sensitivity as standard units are used. Surface raceway follows trim lines rather than cutting chase paths through decorative plaster. Notification appliances are selected in finishes that blend better with historic colors while still meeting candela and audibility standards.

For museums, houses of worship, and civic spaces around New Haven that sit in historic envelopes, Mammoth Security coordinates with preservation boards to document locations and finishes. The result is a fire alarm installation that passes code review and still respects the building.
Common trouble signals in older buildings and how they are solved
Older wiring, environmental UL-listed fire alarm monitoring https://storage.googleapis.com/security-system-installation/new-haven/fire-alarm-inspection-south-central-ct-planning-region.html dust, and past renovations often create recurring panel troubles. A ground fault is a stray electrical path between a circuit and earth that causes a FACP trouble. In practice, that can be a conductor scraped by a metal stud or a damp junction box in a basement. An open circuit on a notification appliance circuit is a broken wire or loose terminal. A dirty smoke head causes nuisance alarms and must be cleaned or replaced. Duct detectors positioned without enough straight duct before or after the sampling tube will misread air movement.

The team isolates wiring errors with a device-by-device walk test, repairs splices, and replaces failing loop segments to restore a clean test. On addressable loops, isolators and loop module mapping let technicians pinpoint the exact run segment. Backup batteries are checked with a load test, and any battery that fails to carry the panel and all notification for the required period is replaced. These are practical, field-tested steps that move an older structure back into stable operation.
Permitting, drawings, and acceptance with the New Haven Fire Marshal
A fire alarm installation for a Wooster Square property starts with drawings and a permit submission. Device layout, wiring diagrams, battery and voltage drop calculations, and a sequence of operations are part of the package. During construction, the team coordinates access, shutdowns for cutovers, and interim protection when a partial system is offline. At acceptance, testing proceeds device by device with a representative from the fire marshal’s office.

For a brownstone converted to six apartments, for example, the test includes every smoke detector in units and corridors, every heat detector in mechanical and storage spaces, horn and strobe output checks, the operation of manual pull stations, duct detector functions through a remote test switch, elevator recall where installed, and the release of every door with a maglock. The monitoring link sends alarms, troubles, and supervisory signals to the central station in real time during the test. That complete demonstration is the proof that the fire alarm installation meets NFPA standards and local requirements.
False alarms and the cost of nuisance trips
False alarms cost more than frustration. In New Haven and across Connecticut, repeat nuisance trips trigger attention and administrative time that owners do not need. While false alarm fines are more commonly discussed with burglar systems under municipal ordinances, any pattern of needless fire department runs creates exposure. The fix is not to “turn down” a detector. The fix is correct device selection, correct placement, and routine maintenance. In older kitchens that were converted to residential units, a heat detector near cooking appliances can be a better choice than a smoke detector for code-required protection, depending on the space and code allowances. In basements with laundry equipment and dust, multi-criteria detectors that can distinguish steam and dust from smoke help reduce nuisance trips.

Routine cleaning and inspection on the NFPA 72 schedule also matter. A detector that is ten years old may fall out of calibration. Replacement is the cost-effective option compared to recurring false alarms and test failures. Mammoth Security builds replacement schedules into its inspection reporting so owners can plan.
Egress hardware: how fire alarms and access control work together
Egress control on older doors is sensitive. Many common doors have been retrofitted with electrified hardware over the years. A maglock is a magnetic lock mounted on the door frame that holds a metal plate on the door. It must release with the fire alarm, a push to exit, and a loss of power. An electric strike is a latch that replaces a door frame’s strike plate and unlatches the door when powered. Both devices must be supervised when used with the fire alarm so a wiring failure is detected. A request-to-exit sensor mounted above the door signals someone is leaving so the controller unlocks the door without sounding a local door alarm.

In Wooster Square walk-ups and corridor buildings that run along grand stairwells, fire alarm integration confirms that all exits release, stair doors unlock as required, and that the notification pattern is audible throughout the egress path. Mammoth Security installs and services access control from DMP, Avigilon Alta, Brivo, Salto, PDQ, and ICT to maintain that egress integrity and to deliver clean audit trails that show when and how doors released during an event.
Structured cabling that does not fight the building
Even a simple fire alarm installation needs clean, reliable wiring. When a site also runs cameras and access control, the building benefits from structured cabling done right. Cat6 cable pulls for IP devices, a fiber optic backbone where distances call for it, and PoE switches that power cameras and access readers through a single cable are installed to TIA/EIA commercial building standards. In historic spaces, cable paths follow mechanical rooms and attic runs with fire-stopping at penetrations, and patch panels consolidate connections so the system is documented and serviceable. That is how an older property avoids the “spaghetti closet” problem that makes future work expensive.
Brands that fit Connecticut fire and security requirements
For fire, Mammoth Security specifies Potter, Kidde, Honeywell, and Simplex. These brands support addressable and conventional panels, voice evacuation, and flexible monitoring options. For intrusion, the team installs DMP, Honeywell, Napco, and 2GIG with 24/7 central station burglar monitoring. For cameras and video management, Avigilon and Avigilon Alta are the premium focus, with Axis and Hanwha Vision widely used across New Haven. For larger sites like manufacturing along the Route 34 corridor or facilities near Science Park, ExacqVision and Milestone manage enterprise-scale video.

Connecticut clients who work on federally or state-funded projects must also follow NDAA Section 889. That federal rule prohibits covered video manufacturers like Hikvision and Dahua in federally connected installations. For those clients, Mammoth Security specifies NDAA-compliant Avigilon, Axis, and Hanwha Vision cameras, with ExacqVision or Milestone for management. For private, non-federally-funded businesses in New Haven, cost-effective Hikvision systems remain an option, and the value comes from a real integrator programming the NVR and supporting the system rather than an electrician who only mounts cameras. This distinction surprises many owners and is a frequent reason audits flag sites for replacement before contract reviews.
A practical phased plan for occupied historic buildings
Many Wooster Square buildings remain fully occupied during upgrades. A practical plan sequences work by floor or by device type to keep life safety intact while new equipment goes online. When an older FACP is replaced, a temporary communicator can keep the old panel monitored while the new panel is wired, programmed, and tested. Devices can be swapped addressable loop by loop so only a small area is offline at a time. Tenant notices coordinate testing so nobody gets surprised by a horn strobe function test during an evening event.

For a property manager operating across East Rock, Downtown, and Fair Haven, this avoids rent credits, business disruption, and inspection delays. It also reduces cost because the integrator controls downtime and returns to test once rather than in multiple revisits.
Voice evacuation where occupancy demands it
Some assembly and high-occupancy spaces around Downtown and near Yale University require voice evacuation systems. A voice evacuation panel replaces traditional horns with speakers. It plays a tone and then a pre-recorded or live message with instructions. In practice, that helps in mixed-use buildings where instructions must be different for occupants on different floors or in different zones. Voice systems also allow fire department personnel to take control and deliver live directions during an incident.

Mammoth Security installs voice evacuation that integrates with the FACP and coordinates with emergency power so that speakers remain active even during a power loss. Amplifier sizing, speaker placement, and intelligibility measurements are documented to meet the code requirement for clear audio across the space.
How Mammoth Security approaches design and submittals
Design starts with a walk-through to capture construction, occupancy, and existing systems. The team builds device layouts, wiring risers, and sequences of operation aligned to NFPA standards and the Connecticut State Fire Safety Code. Battery and voltage drop calculations confirm that power supplies and Notification Appliance Circuits can carry the load. Where elevators, HVAC, and sprinkler systems tie in, the drawings call out monitor modules and control relays that reflect field reality, not generic notes. This up-front work shortens the path to a permit and a clean acceptance test with the New Haven Fire Marshal.

Documentation remains with the property. Device addresses, panel programming notes, and test records form a single-vendor package. That matters when a detector later fails or a tenant upfit adds devices. The same team that installed the system now services it without starting from scratch.
What owners and managers should expect after installation
After a code-compliant fire alarm installation passes acceptance, the long-term work begins. Annual inspection and testing occur on a schedule. Batteries are replaced on condition, not guesswork. Dust-heavy areas are flagged for more frequent cleaning. When a unit turns over or a retail tenant changes its layout, a quick review confirms that detection and notification still reach the right places. A central station monitoring report is available to show that test signals and supervisory signals have been received consistently. These are the hallmarks of a system that remains compliant and reliable.
Local examples and practical outcomes
A converted brownstone near Wooster Square Park had an older conventional panel zoned by floor. When a smoke detector tripped, the fire department only knew “zone 3.” During a renovation, the panel was upgraded to an addressable Potter FACP with apartment-level device addressing. That cut fire department search time and reduced needless tenant disruptions during alarm investigations. The same upgrade added horn strobes placed to meet current candela and audibility rules, which a later inspection verified without change orders.

Along State Street near Union Station, a mixed-use property with a restaurant at grade and apartments above needed maglocks integrated with the fire alarm. The fire alarm installation tied the maglock power supplies to the notification circuit, added request-to-exit sensors, and supervised the wiring so a break would show as trouble. During acceptance, the fire marshal observed each door release on alarm and during a simulated power loss, which documented egress compliance.
Why one integrator for fire, access, video, and cabling
Running separate vendors for fire alarms, access control, security cameras, and cabling creates gaps. When a door does not release on alarm, the access vendor blames the fire vendor, who blames the electrician. Mammoth Security handles all of it: fire alarm installation and inspection, access control installation and repair, security camera systems, and voice and data wiring. One expert team handles the entire system and provides one number to call. That is how an owner avoids finger-pointing and keeps the building compliant and secure.
Serving New Haven and Connecticut statewide from four locations
Mammoth Security operates from New Haven, Bantam, Norwalk, and New Britain. That covers New Haven County, Litchfield County, Fairfield County, and Hartford County. From the New Haven office, the team reaches Wooster Square, East Rock, Westville, Downtown, The Hill, Fair Haven, Science Park, Long Wharf, and nearby towns like West Haven, Hamden, and Branford. This footprint matters because local code enforcement differs in practice, and a team that works daily with the New Haven Fire Marshal understands expectations and timelines.
Brands, credentials, and the integrated stack
Mammoth Security is a Connecticut licensed security and low-voltage contractor. The company is a certified partner with Potter, Honeywell, Napco, DMP, Avigilon, ICT, Axis, Kidde, ExacqVision, and Hanwha Vision. The premium focus includes DMP and Avigilon. Fire alarm systems are designed to meet NFPA standards and local fire marshal requirements, backed by fire alarm inspection and 24/7 central station fire monitoring. The same central station handles 24/7 burglar and intrusion monitoring for DMP, Honeywell, Napco, and 2GIG intrusion platforms. For access control, the team installs and repairs DMP, Avigilon Alta, Brivo, Salto, PDQ, and ICT. For video, Avigilon, Axis, and Hanwha Vision cover most sites, while ExacqVision and Milestone support large industrial deployments and campus-style properties.
What a complete scope looks like for a Wooster Square fire alarm project
A typical scope includes a site survey, code research, design drawings, the fire alarm control panel selection, addressable detectors in apartments and common areas, heat detectors in kitchens and mechanical rooms, duct detectors with remote test stations, manual pull stations at exits, horn strobe notification appliances in corridors and rooms as required by code, a voice evacuation panel where occupancy demands it, power supplies sized to support notification loads, release control for maglocks and electric strikes, a dual-path cellular and IP communicator for 24/7 monitoring, and a test and acceptance with the fire marshal. The work is sequenced to minimize downtime in occupied buildings, and documentation is delivered and stored for future inspection and service.
Costs that owners can actually control
Three variables drive most fire alarm installation costs in historic buildings. First, wiring paths. Concealed runs are labor-intensive, and surface raceway often reduces both cost and disruption while protecting finishes. Second, device count. Addressable systems cut investigative time and improve maintenance tracking, but every device still has to meet spacing rules in NFPA 72. A careful design using multi-criteria detectors can sometimes reduce total device counts in challenging spaces while still meeting code. Third, change orders. Clear drawings, early coordination with the fire marshal, and a team that also handles access control and video eliminate surprises like a forgotten maglock release or a missed elevator interface.
Local, shareable fact Connecticut owners often miss
Many Connecticut owners discover during a loan review or a contract audit that their cameras use NDAA Section 889 banned hardware, which forces a replacement before federal or state-funded work can proceed. That rule does not touch fire alarm equipment, but it does affect integrated projects at universities, housing authorities, and government-adjacent facilities. The practical takeaway is simple. If a property near Yale or along Long Wharf expects any public funding link, specify NDAA-compliant video from Avigilon, Axis, or Hanwha Vision and manage video with ExacqVision or Milestone. Keep the fire alarm installation on its own compliant track with Potter, Kidde, Honeywell, or Simplex, and avoid last-minute changes that delay permits and inspections.
What New Haven property managers can do today
Walk the building and note any unexplained FACP troubles, repeated nuisance alarms, or doors that fail to release on alarm. Confirm whether the monitoring link still relies on old copper phone lines. If it does, move to a dual-path cellular and IP communicator this season. In properties with frequent tenant turnover, coordinate minor layout changes with the fire alarm vendor so a moved wall or a new partition does not create a detection gap. These small, practical steps keep a system code-compliant and avoid inspection delays.
Why New Haven businesses choose Mammoth Security for fire alarm installation
Mammoth Security is built on one expert team with no vendor juggling. Cameras, access control, fire alarms, burglar alarms, and structured cabling connect and communicate as one documented system. The company serves Connecticut statewide from four locations and is rated 4.7 stars on Google by Connecticut clients. Fire alarm installation is designed to meet NFPA standards and local fire marshal requirements, inspections are scheduled and documented, and 24/7 central station monitoring keeps systems active. For federally or state-funded clients, NDAA Section 889 compliant video options are specified. For private clients, cost-effective options are available and supported by a real integrator who programs and services the system.
Request a code-focused fire alarm installation plan for Wooster Square
Property managers and owners in Wooster Square, East Rock, Downtown, Westville, and across New Haven County can schedule a free security assessment to review fire alarm installation needs, acceptance testing timelines, and integration with access control and cameras. Mammoth Security Inc. Is a Connecticut licensed security and low-voltage contractor with offices in New Haven, Bantam, Norwalk, and New Britain. Fire alarm systems are designed to meet NFPA standards, coordinated with the New Haven Fire Marshal, and monitored 24/7. Call (203) 747-8244 to schedule a site consultation and get a code-compliant fire alarm installation plan that fits a historic building and passes inspection the first time.

<div class="mammoth-nap-card" style="max-width: 420px; font-family: -apple-system, BlinkMacSystemFont, 'Segoe UI', Roboto, Helvetica, Arial, sans-serif; background: #ffffff; border: 1px solid #e2e8f0; border-radius: 12px; box-shadow: 0 4px 6px -1px rgba(0, 0, 0, 0.05), 0 2px 4px -1px rgba(0, 0, 0, 0.03); overflow: hidden; color: #1a202c; transition: transform 0.2s ease, box-shadow 0.2s ease;">

<div style="background: #0f172a; padding: 20px; color: #ffffff; position: relative;">
<h3 style="margin: 0; font-size: 1.25rem; font-weight: 700; letter-spacing: -0.025em;">Mammoth Security Inc.</h3>
<p style="margin: 4px 0 0 0; font-size: 0.85rem; color: #94a3b8; font-weight: 500; text-transform: uppercase; letter-spacing: 0.05em;">New Haven Headquarters

</div>

<div style="padding: 24px; display: flex; flex-direction: column; gap: 16px;">

<div style="display: flex; gap: 12px; align-items: flex-start;">
<span style="font-size: 1.2rem; line-height: 1; margin-top: 2px;">📍</span>
<div style="font-size: 0.95rem; line-height: 1.5; color: #334155;">
<strong style="color: #0f172a; display: block; margin-bottom: 2px;">Physical Address</strong>
857 Whalley Ave Suite 201<br>
New Haven, CT 06515<br>
<span style="font-size: 0.85rem; color: #64748b;">United States</span>
</div>
</div>

<div style="display: flex; gap: 12px; align-items: flex-start;">
<span style="font-size: 1.2rem; line-height: 1; margin-top: 2px;">📞</span>
<div style="font-size: 0.95rem; line-height: 1.5;">
<strong style="color: #0f172a; display: block; margin-bottom: 2px;">Phone Number</strong>
+1 (203) 747-8244 tel:+12037478244
</div>
</div>

<div style="display: flex; gap: 10px; width: 10px; min-width: 100%;">
<a href="https://www.google.com/maps?cid=17087103584271864861&g_mp=CiVnb29nbGUubWFwcy5wbGFjZXMudjEuUGxhY2VzLkdldFBsYWNlEAMYASAF&hl=en&gl=IN&source=embed" target="_blank" rel="noopener noreferrer" style="flex: 1; text-align: center; background: #2563eb; color: #ffffff; padding: 10px 16px; border-radius: 6px; font-size: 0.875rem; font-weight: 600; text-decoration: none; box-shadow: 0 1px 2px 0 rgba(0, 0, 0, 0.05); transition: background 0.15s ease;">
Get Directions
</a>
<a href="https://mammothsecurity.com/ct/new-haven" target="_blank" rel="noopener noreferrer" style="flex: 1; text-align: center; background: #ffffff; color: #1e293b; padding: 10px 16px; border: 1px solid #cbd5e1; border-radius: 6px; font-size: 0.875rem; font-weight: 600; text-decoration: none; transition: background 0.15s ease;">
Visit Website
</a>
</div>

<div style="display: flex; justify-content: center; gap: 16px; margin-top: 8px; padding-top: 12px; border-top: 1px solid #f1f5f9;">
<a href="https://www.facebook.com/mammothsecure" target="_blank" rel="noopener noreferrer" style="color: #475569; font-size: 0.875rem; font-weight: 500; text-decoration: none; display: flex; align-items: center; gap: 4px;">
<span style="font-size: 1rem;">📘</span> Facebook
</a>
<a href="https://www.instagram.com/mammothsecurityinc/" target="_blank" rel="noopener noreferrer" style="color: #475569; font-size: 0.875rem; font-weight: 500; text-decoration: none; display: flex; align-items: center; gap: 4px;">
<span style="font-size: 1rem;">📸</span> Instagram
</a>
<a href="https://www.linkedin.com/company/mammoth-security-inc/" target="_blank" rel="noopener noreferrer" style="color: #475569; font-size: 0.875rem; font-weight: 500; text-decoration: none; display: flex; align-items: center; gap: 4px;">
<span style="font-size: 1rem;">💼</span> LinkedIn
</a>
</div>

</div>
</div>