What You Should Know About Your Peugeot Key Fob
Peugeot Key Fob lets drivers start the car from a distance. This is beneficial during cold or hot weather and allows drivers to warm up the engine and interior before entering the vehicle.
Car dealerships can cut and program new Peugeot keys for you but only if they have the patience to wait weeks for them to do so. KeyNOW KeyNOW, we can cut, program and hand over new Peugeot keys to you, much quicker.
Keyless Entry
Along with unlocking and opening your car doors, some key fobs can also be used to start the engine. This is useful if the vehicle is left on a hot day, or when the trunk is filled with heavy objects that make it difficult to manually open the door. Press the unlock button on your key fob several times quickly to begin the vehicle. The door locks should close and the red LED light should start to flash. If this does not happen, your key fob battery could be dead and requires to be replaced. Alternately RF interference caused by nearby buildings could affect your system.
Certain key fobs can also be equipped with an actual key that can be used to unlock your car (often for the driver's side door, but sometimes the boot as well). You can access them by lifting a flap or pressing a button. The key's physical form can be removed from the slot of the case to access the lock.
Key fobs can be damaged by water, especially if the chips inside them are exposed to salty or soapy water. In certain instances a chip that has been damaged can cause key fobs to stop functioning. In this instance the key fob has to be replaced by the dealer. Locksmiths can replace keys much faster and at a lesser cost than dealerships.
Remote Start
If your key fob comes with the remote start feature it allows you to start the engine without needing to hold your car keys in hands. This is especially useful in hot weather and you want to cool down your car while doing the errands. However, there are some things you should know before using this feature.
Some key fobs come with a remote engine start button that can be pressed to start your car remotely (for instance, Ford has a circular arrow that is moving clockwise on its key fob). Mazdas, for example, require you to first lock the key and then press the Start button.
It could be that you have a weak or dead battery in your key fob if you're unable to start the car. The battery of the key fob isn't powerful enough to transmit a signal to the car's system.
If this is the situation, you'll need to replace the batteries in your key fob or try changing the program. This procedure varies from car to car, but you can typically follow the steps in your owner's manual. Our mobile technicians are also able to assist with this procedure We've got the expert equipment to cut and program replacement Peugeot keys at the workplace, at home or if you're at the side of the road.
Door Locks
The Peugeot 3008 remote allows you to lock or unlock your car by pressing the button on your key fob. Contrary to the traditional key, which has a key hole that is physical the key fob has an encrypted copy of the car key inside.
For this, it uses a special radio signal that is only sent out when the key is within a specified range of the car. A solenoid in the door lock converts the electronic command to an actual mechanical one after the signal has been spotted. The rod is then turned to turn the car door locks, just like keys on a real key would.
If the Peugeot key fob has stopped locking or unlocking the car, there are many possible causes of the problem. The most common cause is a dead battery for the coin, which is easily replaced in a matter of minutes. Other causes are worn buttons, water damage, signal interference or a malfunctioning electronic chip.
The key fobs of modern cars is no exception. Modern vehicles require an extremely high level precision in order to operate. The key fob might be improperly programmed, or suffer from an issue with the hardware that prevents it from responding to a signal from the vehicle. A locksmith certified by the ICRC can reprogram the key fob and ensure that it works with your vehicle.
Immobiliser
Peugeot was one of the first manufacturers to install an immobiliser on a key. https://www.g28carkeys.co.uk/peugeot-car-key-replacements-near-me/ stops the vehicle from starting if it sees an untrue signal coming from the key to the car. If it's new, this is great, but as they age the chips can get worn out and cause issues. This typically starts with an error message that says 'anti-theft system active' on the dashboard, or a warning light is blinking indicating "immobiliser fault".
Peugeot dealerships are typically called to create and program replacement keys. However, a professional mobile locksmith is equipped with dealer-standard tools in their van, meaning they can be there and creating new Peugeot keys on the roadside or at home, much faster than dealerships are able to.
Generally Peugeot keys begin to exhibit problems when the blade wears out. This wear can cause the mouth of the key not to be able to enter the lock correctly, which can cause further wear on the locks. The issue can be fixed by simply replacing the blade. It is also possible to have the teeth on the key cleaned to enable them to work more smoothly. Only a licensed auto locksmith can do this, but it can save you a lot of time and money in the end.